[Tue Jul 17 11:24:39 2012] Detection parameters:
  Position = (369.9, 291.9) = 4 13 14.06 10 26 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1526.0 +/- 67.0
  Background counts = 1126.1
  Rate = 0.02 +/- 0.0009

[Tue Jul 17 11:24:42 2012] Off-axis axis estimate = 5.20'
[Tue Jul 17 11:40:08 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 11:40:08 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Tue Jul 17 11:40:08 2012] source mask rpix=2.1, npix_max = 26, mask sum = 10, frac = 0.377
[Tue Jul 17 11:40:08 2012] Skipping simple spatial due to low active detector fraction
[Tue Jul 17 23:41:24 2012] Spatial fit model total counts = 11626.400000, observed total counts = 11623.000000
[Tue Jul 17 23:41:24 2012] Offset between fit and detection position for source 14 = 5.316482 pixels
[Tue Jul 17 23:41:24 2012] Warning, changing simple spatial fit ID from -1 to 49
[Tue Jul 17 23:41:24 2012] 11390.364000 total counts/ 10912.500000 bgd. counts: snr = 4.574485
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 5.316482 pixels
  Position = (375.2, 292.4) = 4 13 12.50 10 26 35.4
  Extent = 18.4 (16.9-19.1)", rotation angle = 0
  Source counts = 477.9 +/- 106.7
  Background counts = 10912.5
  Rate = 0.004 +/- 0.0009
[Tue Jul 17 23:41:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:24 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 23:41:24 2012] Source does appear to be extended
[Tue Jul 17 23:41:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 23:41:24 2012] Source is confused with source 12
[Tue Jul 17 23:41:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 17 23:41:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 23:41:56 2012] Initial guess for spatial extent in simple fitting = 18.37"
[Tue Jul 17 23:41:56 2012] source mask rpix=4.2, npix_max = 89, mask sum = 88, frac = 0.987
[Tue Jul 17 23:41:56 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 18.37"
[Wed Jul 18 06:54:50 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src12.ximg exists
[Wed Jul 18 06:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src12.csv
[Wed Jul 18 06:54:50 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Jul 18 06:54:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src12.csv
[Wed Jul 18 06:54:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 06:54:51 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Jul 18 06:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed Jul 18 06:54:51 2012] fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Jul 18 06:54:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed Jul 18 06:54:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 11:51:03 2012] Warning, spatial fit 12 centroid is now closest to src. 56
[Wed Jul 18 11:51:03 2012] Source 14 is offset by -1.284046 and 4.050545 pixels which is larger than
2 X fitted extent = 1.098943 x 1.098943, not incorporating fit results
[Wed Jul 18 11:51:03 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:03 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 11:51:03 2012] Source does appear to be extended
[Wed Jul 18 11:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 11:51:33 2012] XMMSAS src. selection expression = ellipse(32594.634000, 25388.544000, 1101.954032, 1101.954032, 0.000000, X, Y)
[Wed Jul 18 11:51:33 2012] Writing source region out to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src14_src.reg
[Wed Jul 18 11:51:33 2012] Extracting stamp from image fullrun_pn_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (312, 229) - (439, 356)
[Wed Jul 18 11:51:33 2012] XMMSAS bgd. selection expression = annulus(32594.634000, 25388.544000, 1836.590053, 3673.180106, X, Y) && !ellipse(28873.321800, 26942.659200, 3707.712107, 3707.712107, 0.000000, X, Y) && !ellipse(27614.361755, 28708.812622, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28746.745026, 28527.028076, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31028.612610, 28229.962158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32697.370209, 27119.039490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.725891, 26140.674469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32273.593018, 26314.698364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31727.591553, 23276.195221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32715.209351, 27914.796906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33358.785797, 26313.527496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31306.349915, 22589.941833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32354.008545, 29525.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33318.185089, 28670.558960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34153.093567, 25350.524475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33367.077454, 24922.958557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32392.564000, 24020.462000, 1526.592044, 1526.592044, 0.000000, X, Y) && !ellipse(32122.516541, 22680.539398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28318.748993, 22327.306335, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 11:51:33 2012] Writing fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src14.gif
[Wed Jul 18 13:02:16 2012] Mean detx,y = (5535.21, 996.33) 
[Wed Jul 18 13:02:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 13:03:03 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 13:03:03 2012] Setting source spectrum file to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jul 18 13:03:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Jul 20 12:25:50 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:25:50 2012] Error reading totcts from fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Jul 20 12:25:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:25:54 2012] Using photon index=1.80, rate=0.00414, arf fullrun_pn_xmm0109880101_pi300-10000_pass1_cl_src14.arf
[Fri Jul 20 12:25:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:25:54 2012] Updating source flux to 1.1e-14
[Fri Jul 20 12:35:29 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Fri Jul 20 12:35:29 2012] Flag c found in src. 14 procflags, skipping spectral fitting