[Tue Jul 17 11:26:18 2012] Detection parameters:
  Position = (371.5, 324.9) = 4 13 13.60 10 28 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.4 +/- 36.3
  Background counts = 547.7
  Rate = 0.002 +/- 0.0003

[Tue Jul 17 11:26:19 2012] Off-axis axis estimate = 5.63'
[Tue Jul 17 17:40:28 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 17:40:28 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Tue Jul 17 17:40:28 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.907
[Tue Jul 17 17:40:28 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.24"
[Tue Jul 17 23:41:07 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src25.ximg exists
[Tue Jul 17 23:41:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src25.csv
[Tue Jul 17 23:41:07 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Jul 17 23:41:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src25.csv
[Tue Jul 17 23:41:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:41:08 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Jul 17 23:41:08 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Jul 17 23:41:08 2012] Fit fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Jul 17 23:41:41 2012] Source 43 is offset by -5.583494 and -7.443144 pixels which is larger than
2 X fitted extent = 1.884244 x 1.884244, not incorporating fit results
[Tue Jul 17 23:41:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:41 2012] Assessing source extent using major
[Tue Jul 17 23:41:41 2012] Source does appear to be extended
[Tue Jul 17 23:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 09:19:46 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 09:19:46 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Wed Jul 18 09:19:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.907
[Wed Jul 18 09:19:46 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 9.24"
[Wed Jul 18 11:50:49 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jul 18 11:50:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src25.csv
[Wed Jul 18 11:50:49 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jul 18 11:50:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src25.csv
[Wed Jul 18 11:50:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 11:50:50 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jul 18 11:50:50 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jul 18 11:50:50 2012] Fit fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Jul 18 11:51:18 2012] Source 43 is offset by -5.616896 and -7.380892 pixels which is larger than
2 X fitted extent = 1.883752 x 1.883752, not incorporating fit results
[Wed Jul 18 11:51:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:18 2012] Assessing source extent using major
[Wed Jul 18 11:51:18 2012] Source does appear to be extended
[Wed Jul 18 11:51:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 21:19:09 2012] XMMSAS src. selection expression = ellipse(32269.098053, 28214.536438, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 21:19:09 2012] Writing source region out to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src43_src.reg
[Thu Jul 19 21:19:09 2012] Extracting stamp from image fullrun_mos2_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (334, 287) - (409, 362)
[Thu Jul 19 21:19:09 2012] XMMSAS bgd. selection expression = annulus(32269.098053, 28214.536438, 1087.500000, 2175.000000, X, Y) && !ellipse(28871.195160, 26885.566200, 7178.688207, 7178.688207, 0.000000, X, Y) && !ellipse(27418.694400, 27842.226800, 3570.216103, 3570.216103, 358.993000, X, Y) && !ellipse(31334.918000, 27040.116000, 940.544027, 940.544027, 0.000000, X, Y) && !ellipse(32703.916000, 27303.284000, 502.310414, 502.310414, 0.000000, X, Y) && !ellipse(31873.664000, 24873.424000, 2758.912079, 2758.912079, 0.000000, X, Y) && !ellipse(31878.892000, 27031.718600, 1388.784040, 1388.784040, 0.000000, X, Y) && !ellipse(31475.947876, 28541.835175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33180.436000, 25623.384000, 1475.320042, 1475.320042, 0.000000, X, Y) && !ellipse(32616.439606, 25971.010132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32694.890411, 25591.656891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33257.418280, 26133.840000, 1517.480044, 1517.480044, 0.000000, X, Y)
[Thu Jul 19 21:19:09 2012] Writing fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src43.gif
[Thu Jul 19 22:00:53 2012] Mean detx,y = (-4658.70, 1579.39) 
[Thu Jul 19 22:00:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 22:01:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 22:01:10 2012] Setting source spectrum file to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Jul 19 22:01:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jul 20 12:00:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 12:00:02 2012] rmf not generated due to insufficient counts
[Fri Jul 20 12:26:03 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:26:03 2012] Error reading totcts from fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jul 20 12:26:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:06 2012] Using photon index=1.80, rate=0.00229, arf fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src43.arf
[Fri Jul 20 12:26:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:06 2012] Updating source flux to 2.7e-14
[Fri Jul 20 12:30:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting