[Tue Jul 17 11:26:15 2012] Detection parameters:
  Position = (318.3, 318.0) = 4 13 29.29 10 28 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12218.1 +/- 143.7
  Background counts = 959.2
  Rate = 0.1 +/- 0.001

[Tue Jul 17 11:26:19 2012] Off-axis axis estimate = 2.02'
[Tue Jul 17 17:40:28 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 17:40:28 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Tue Jul 17 17:40:28 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Tue Jul 17 17:40:28 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.44"
[Tue Jul 17 23:41:06 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jul 17 23:41:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src2.csv
[Tue Jul 17 23:41:06 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jul 17 23:41:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src2.csv
[Tue Jul 17 23:41:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:41:07 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jul 17 23:41:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul 17 23:41:07 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jul 17 23:41:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jul 17 23:41:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:41:41 2012] Spatial fit model total counts = 74853.400000, observed total counts = 62528.000000
[Tue Jul 17 23:41:41 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 23:41:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:41 2012] Assessing source extent using major
[Tue Jul 17 23:41:41 2012] Source does appear to be extended
[Tue Jul 17 23:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 09:19:46 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 09:19:46 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Wed Jul 18 09:19:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.819
[Wed Jul 18 09:19:46 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.44"
[Wed Jul 18 11:50:48 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 18 11:50:48 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 18 11:50:48 2012] Fit fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jul 18 11:50:50 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 18 11:50:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jul 18 11:50:50 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 18 11:50:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jul 18 11:50:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 11:51:18 2012] Spatial fit model total counts = 57068.800000, observed total counts = 62528.000000
[Wed Jul 18 11:51:18 2012] Offset between fit and detection position for source 2 = 3.634690 pixels
[Wed Jul 18 11:51:18 2012] 53078.400000 total counts/ 25600.000000 bgd. counts: snr = 171.740000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.634690 pixels
  Position = (315.7, 320.6) = 4 13 30.04 10 28 38.1
  Extent = 14.9 (14.9-29.8)" x 14.9 (14.9-29.8)", rotation angle = 359 (357-0) degrees
  Source counts = 27478.4 +/- 230.4
  Background counts = 25600.0
  Rate = 0.2 +/- 0.002
[Wed Jul 18 11:51:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 11:51:18 2012] Source does appear to be extended
[Wed Jul 18 11:51:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Wed Jul 18 11:51:18 2012] Source is confused with source 1
[Thu Jul 19 21:19:08 2012] Counts = 27478.400000, rescaling region sizes by 3.000000
[Thu Jul 19 21:19:08 2012] XMMSAS src. selection expression = ellipse(27418.694400, 27842.226800, 2677.662077, 2677.662077, 358.993000, X, Y)
[Thu Jul 19 21:19:08 2012] Writing source region out to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul 19 21:19:08 2012] Extracting stamp from image fullrun_mos2_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (162, 167) - (470, 474)
[Thu Jul 19 21:19:09 2012] XMMSAS bgd. selection expression = annulus(27418.694400, 27842.226800, 13388.310385, 26776.620770, X, Y) && !ellipse(28871.195160, 26885.566200, 7178.688207, 7178.688207, 0.000000, X, Y) && !ellipse(40061.229370, 37175.002777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31334.918000, 27040.116000, 940.544027, 940.544027, 0.000000, X, Y) && !ellipse(32703.916000, 27303.284000, 502.310414, 502.310414, 0.000000, X, Y) && !ellipse(25655.417419, 28929.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.284000, 28356.600000, 2456.464071, 2456.464071, 0.000000, X, Y) && !ellipse(22527.800200, 25292.768600, 406.971212, 406.971212, 0.000000, X, Y) && !ellipse(25531.371796, 27698.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31873.664000, 24873.424000, 2758.912079, 2758.912079, 0.000000, X, Y) && !ellipse(31405.383200, 22321.295800, 321.684809, 321.684809, 0.000000, X, Y) && !ellipse(41570.098450, 29630.195404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25372.852000, 29618.316000, 1299.784037, 1299.784037, 0.000000, X, Y) && !ellipse(35667.202400, 25697.517860, 345.404010, 345.404010, 0.000000, X, Y) && !ellipse(31878.892000, 27031.718600, 1388.784040, 1388.784040, 0.000000, X, Y) && !ellipse(31475.947876, 28541.835175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28999.376373, 30206.326141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30910.848785, 23626.491821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33180.436000, 25623.384000, 1475.320042, 1475.320042, 0.000000, X, Y) && !ellipse(32616.439606, 25971.010132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32694.890411, 25591.656891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25920.431824, 30584.043884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34978.194366, 21159.081497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32269.098053, 28214.536438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24713.705078, 26992.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21982.959656, 21738.804489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40051.692505, 19538.079910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30372.103516, 41037.972168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25252.956000, 30193.006000, 1286.776037, 1286.776037, 0.000000, X, Y) && !ellipse(33228.354000, 24615.362200, 1379.456040, 1379.456040, 0.000000, X, Y) && !ellipse(24593.370000, 28684.708000, 1265.624036, 1265.624036, 0.000000, X, Y) && !ellipse(33257.418280, 26133.840000, 1517.480044, 1517.480044, 0.000000, X, Y)
[Thu Jul 19 21:19:09 2012] Writing fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2.gif
[Thu Jul 19 21:21:38 2012] Mean detx,y = (-986.18, 128.44) 
[Thu Jul 19 21:21:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 21:30:30 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 21:30:30 2012] Setting source spectrum file to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul 19 21:30:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jul 20 12:26:02 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:26:02 2012] Error reading totcts from fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jul 20 12:26:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:04 2012] Using photon index=1.80, rate=0.219, arf fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 12:26:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:05 2012] Updating source flux to 1.9e-12
[Fri Jul 20 12:30:27 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Fri Jul 20 12:30:27 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jul 20 12:35:29 2012] Reading fit data from xmm0109880101/analysis//spectral/fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jul 20 12:35:29 2012] Spectral fit parameter nH value = 4.07654e+21
[Fri Jul 20 12:35:29 2012] Spectral fit parameter PhoIndex value = 1.93223
[Fri Jul 20 12:35:29 2012] Failed to get F(0.3-8.0) from xmm0109880101/analysis//spectral/fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 12:35:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:35:29 2012] Using Nh = 4.1e+21, photon index=1.93, rate=0.219, arf fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src2.arf
[Fri Jul 20 12:35:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:35:29 2012] Updating source flux to 2.4e-12