[Tue Jul 17 11:26:17 2012] Detection parameters:
  Position = (367.6, 316.9) = 4 13 14.73 10 28 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 439.4 +/- 43.1
  Background counts = 627.3
  Rate = 0.004 +/- 0.0004

[Tue Jul 17 11:26:19 2012] Off-axis axis estimate = 5.19'
[Tue Jul 17 17:40:28 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 17:40:28 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Tue Jul 17 17:40:28 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.943
[Tue Jul 17 17:40:28 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.02"
[Tue Jul 17 23:41:06 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jul 17 23:41:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src15.csv
[Tue Jul 17 23:41:06 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jul 17 23:41:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src15.csv
[Tue Jul 17 23:41:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 23:41:07 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jul 17 23:41:07 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jul 17 23:41:07 2012] Fit fullrun_mos2_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jul 17 23:41:41 2012] Spatial fit model total counts = 23086.700000, observed total counts = 22989.000000
[Tue Jul 17 23:41:41 2012] Offset between fit and detection position for source 19 = 5.672364 pixels
[Tue Jul 17 23:41:41 2012] Warning, changing simple spatial fit ID from 15 to 4
[Tue Jul 17 23:41:41 2012] 21644.850000 total counts/ 19941.700000 bgd. counts: snr = 12.060680
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 5.672364 pixels
  Position = (367.0, 311.3) = 4 13 14.93 10 27 57.6
  Extent = 17.4 (17.3-34.7)", rotation angle = 0
  Source counts = 1703.2 +/- 147.1
  Background counts = 19941.7
  Rate = 0.01 +/- 0.001
[Tue Jul 17 23:41:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:41 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 23:41:41 2012] Source does appear to be extended
[Tue Jul 17 23:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 23:41:41 2012] Source is confused with source 3
[Wed Jul 18 09:19:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 09:19:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 18 09:19:46 2012] Initial guess for spatial extent in simple fitting = 17.36"
[Wed Jul 18 09:19:46 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.004
[Wed Jul 18 09:19:46 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 17.36"
[Wed Jul 18 11:50:49 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jul 18 11:50:49 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jul 18 11:50:49 2012] Fit fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_src15 appears to have run properly
[Wed Jul 18 11:50:50 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jul 18 11:50:50 2012] fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jul 18 11:50:50 2012] Fit fullrun_mos2_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jul 18 11:51:18 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 17.897504 pixels away
[Wed Jul 18 11:51:18 2012] Warning, spatial fit 15 centroid is now closest to src. 20
[Wed Jul 18 11:51:18 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:18 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 11:51:18 2012] Source does appear to be extended
[Wed Jul 18 11:51:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 21:19:09 2012] Counts = 1703.150000, rescaling region sizes by 2.000000
[Thu Jul 19 21:19:09 2012] XMMSAS src. selection expression = ellipse(31878.892000, 27031.718600, 2083.176060, 2083.176060, 0.000000, X, Y)
[Thu Jul 19 21:19:09 2012] Writing source region out to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src19_src.reg
[Thu Jul 19 21:19:09 2012] Extracting stamp from image fullrun_mos2_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (247, 192) - (487, 431)
[Thu Jul 19 21:19:09 2012] XMMSAS bgd. selection expression = annulus(31878.892000, 27031.718600, 6943.920200, 13887.840400, X, Y) && !ellipse(28871.195160, 26885.566200, 7178.688207, 7178.688207, 0.000000, X, Y) && !ellipse(27418.694400, 27842.226800, 3570.216103, 3570.216103, 358.993000, X, Y) && !ellipse(40061.229370, 37175.002777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31334.918000, 27040.116000, 940.544027, 940.544027, 0.000000, X, Y) && !ellipse(32703.916000, 27303.284000, 502.310414, 502.310414, 0.000000, X, Y) && !ellipse(25655.417419, 28929.676544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.284000, 28356.600000, 2456.464071, 2456.464071, 0.000000, X, Y) && !ellipse(22527.800200, 25292.768600, 406.971212, 406.971212, 0.000000, X, Y) && !ellipse(25531.371796, 27698.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31873.664000, 24873.424000, 2758.912079, 2758.912079, 0.000000, X, Y) && !ellipse(31405.383200, 22321.295800, 321.684809, 321.684809, 0.000000, X, Y) && !ellipse(41570.098450, 29630.195404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25372.852000, 29618.316000, 1299.784037, 1299.784037, 0.000000, X, Y) && !ellipse(35667.202400, 25697.517860, 345.404010, 345.404010, 0.000000, X, Y) && !ellipse(31475.947876, 28541.835175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28999.376373, 30206.326141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30910.848785, 23626.491821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33180.436000, 25623.384000, 1475.320042, 1475.320042, 0.000000, X, Y) && !ellipse(32616.439606, 25971.010132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32694.890411, 25591.656891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25920.431824, 30584.043884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34978.194366, 21159.081497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32269.098053, 28214.536438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24713.705078, 26992.299011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21982.959656, 21738.804489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40051.692505, 19538.079910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30372.103516, 41037.972168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25252.956000, 30193.006000, 1286.776037, 1286.776037, 0.000000, X, Y) && !ellipse(33228.354000, 24615.362200, 1379.456040, 1379.456040, 0.000000, X, Y) && !ellipse(24593.370000, 28684.708000, 1265.624036, 1265.624036, 0.000000, X, Y) && !ellipse(33257.418280, 26133.840000, 1517.480044, 1517.480044, 0.000000, X, Y)
[Thu Jul 19 21:19:09 2012] Writing fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src19.gif
[Thu Jul 19 21:47:43 2012] Mean detx,y = (-3752.15, 135.79) 
[Thu Jul 19 21:47:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 21:51:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 21:51:56 2012] Setting source spectrum file to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul 19 21:51:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Jul 20 12:26:03 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:26:03 2012] Error reading totcts from fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Jul 20 12:26:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:05 2012] Using photon index=1.80, rate=0.0136, arf fullrun_mos2_xmm0109880101_pi300-10000_pass1_cl_src19.arf
[Fri Jul 20 12:26:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:05 2012] Updating source flux to 1.3e-13
[Fri Jul 20 12:30:27 2012] Flag c found in src. 19 procflags, skipping spectral fitting