[Tue Jul 17 11:25:24 2012] Detection parameters:
  Position = (356.2, 271.2) = 4 13 18.12 10 25 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.0 +/- 28.4
  Background counts = 308.1
  Rate = 0.003 +/- 0.0005

[Tue Jul 17 11:25:25 2012] Off-axis axis estimate = 4.63'
[Tue Jul 17 15:30:45 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 15:30:45 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Tue Jul 17 15:30:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Tue Jul 17 15:30:45 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.74"
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src27.csv
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src27.csv
[Tue Jul 17 17:40:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jul 17 17:40:27 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jul 17 23:41:32 2012] Spatial fit model total counts = 6469.100000, observed total counts = 6462.000000
[Tue Jul 17 23:41:32 2012] Offset between fit and detection position for source 40 = 4.812668 pixels
[Tue Jul 17 23:41:32 2012] Warning, changing simple spatial fit ID from 27 to 16
[Tue Jul 17 23:41:32 2012] 6477.179000 total counts/ 5875.910000 bgd. counts: snr = 7.843886
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 4.812668 pixels
  Position = (360.4, 273.5) = 4 13 16.88 10 25 13.3
  Extent = 17.3 (17.2-34.5)", rotation angle = 0
  Source counts = 601.3 +/- 80.5
  Background counts = 5875.9
  Rate = 0.009 +/- 0.001
[Tue Jul 17 23:41:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 23:41:32 2012] Source does appear to be extended
[Tue Jul 17 23:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 23:41:32 2012] Source is confused with source 39
[Wed Jul 18 06:54:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:54:52 2012] Initial guess for spatial extent in simple fitting = 17.26"
[Wed Jul 18 06:54:52 2012] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.015
[Wed Jul 18 06:54:52 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 17.26"
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src26.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src26.csv
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src26.csv
[Wed Jul 18 09:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jul 18 09:19:46 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Jul 18 11:51:10 2012] Warning, spatial fit 26 centroid is now closest to src. 39
[Wed Jul 18 11:51:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 11:51:10 2012] Source does appear to be extended
[Wed Jul 18 11:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 05:15:51 2012] XMMSAS src. selection expression = ellipse(31303.770000, 23746.106000, 1035.462030, 1035.462030, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing source region out to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src40_src.reg
[Thu Jul 19 05:15:51 2012] Extracting stamp from image fullrun_mos1_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (301, 214) - (420, 333)
[Thu Jul 19 05:15:51 2012] XMMSAS bgd. selection expression = annulus(31303.770000, 23746.106000, 1725.770050, 3451.540099, X, Y) && !ellipse(28881.339400, 26923.239000, 3707.208107, 3707.208107, 0.000000, X, Y) && !ellipse(29527.939606, 25233.461578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30987.668000, 24614.712000, 1425.176041, 1425.176041, 0.000000, X, Y) && !ellipse(26663.102000, 28344.952000, 2460.096071, 2460.096071, 0.000000, X, Y) && !ellipse(32719.042000, 27298.774800, 265.744008, 265.744008, 0.000000, X, Y) && !ellipse(32074.566711, 24815.833435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31383.084800, 22330.388600, 342.477610, 342.477610, 0.000000, X, Y) && !ellipse(32574.973358, 25217.688049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32218.132111, 27182.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31735.123871, 23969.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32777.964000, 24027.860000, 1470.688042, 1470.688042, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src40.gif
[Thu Jul 19 06:02:10 2012] Mean detx,y = (-2629.04, 4198.37) 
[Thu Jul 19 06:02:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 06:02:30 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 06:02:30 2012] Setting source spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jul 19 06:02:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri Jul 20 12:26:00 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:26:00 2012] Error reading totcts from fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jul 20 12:26:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:02 2012] Using photon index=1.80, rate=0.00877, arf fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src40.arf
[Fri Jul 20 12:26:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:02 2012] Updating source flux to 8.6e-14
[Fri Jul 20 12:26:08 2012] Flag c found in src. 40 procflags, skipping spectral fitting