[Tue Jul 17 11:25:22 2012] Detection parameters:
  Position = (340.0, 290.6) = 4 13 22.89 10 26 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2154.0 +/- 66.8
  Background counts = 512.6
  Rate = 0.04 +/- 0.001

[Tue Jul 17 11:25:25 2012] Off-axis axis estimate = 3.06'
[Tue Jul 17 15:30:45 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 15:30:45 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue Jul 17 15:30:45 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.737
[Tue Jul 17 15:30:45 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.96"
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src3.csv
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src3.csv
[Tue Jul 17 17:40:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 17 17:40:27 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jul 17 23:41:32 2012] Source 4 is offset by 4.674110 and -8.722603 pixels which is larger than
2 X fitted extent = 5.757885 x 5.757885, not incorporating fit results
[Tue Jul 17 23:41:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:32 2012] Assessing source extent using major
[Tue Jul 17 23:41:32 2012] Source does appear to be extended
[Tue Jul 17 23:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 06:54:52 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:54:52 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Wed Jul 18 06:54:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.737
[Wed Jul 18 06:54:52 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.96"
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src3.csv
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src3.csv
[Wed Jul 18 09:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 18 09:19:45 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 18 11:51:10 2012] Source 4 is offset by 4.682225 and -8.722603 pixels which is larger than
2 X fitted extent = 5.813425 x 5.813425, not incorporating fit results
[Wed Jul 18 11:51:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:10 2012] Assessing source extent using major
[Wed Jul 18 11:51:10 2012] Source does appear to be extended
[Wed Jul 18 11:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 05:15:50 2012] Counts = 2154.049561, rescaling region sizes by 2.000000
[Thu Jul 19 05:15:50 2012] XMMSAS src. selection expression = ellipse(29527.939606, 25233.461578, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jul 19 05:15:50 2012] Writing source region out to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 19 05:15:50 2012] Extracting stamp from image fullrun_mos1_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (265, 216) - (415, 366)
[Thu Jul 19 05:15:50 2012] XMMSAS bgd. selection expression = annulus(29527.939606, 25233.461578, 4350.000000, 8700.000000, X, Y) && !ellipse(28881.339400, 26923.239000, 3707.208107, 3707.208107, 0.000000, X, Y) && !ellipse(28290.151672, 29043.566681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28828.756226, 29041.309906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29373.119537, 28955.337402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.874000, 29233.482000, 1292.040037, 1292.040037, 0.000000, X, Y) && !ellipse(30987.668000, 24614.712000, 1425.176041, 1425.176041, 0.000000, X, Y) && !ellipse(26663.102000, 28344.952000, 2460.096071, 2460.096071, 0.000000, X, Y) && !ellipse(32719.042000, 27298.774800, 265.744008, 265.744008, 0.000000, X, Y) && !ellipse(31170.749603, 28623.424225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.002000, 29260.406000, 1422.696041, 1422.696041, 0.000000, X, Y) && !ellipse(21972.988180, 21528.927000, 325.424009, 325.424009, 0.000000, X, Y) && !ellipse(22509.948800, 25284.890800, 399.908812, 399.908812, 0.000000, X, Y) && !ellipse(32074.566711, 24815.833435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31818.114777, 28616.385742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28507.840179, 30591.292114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25931.942000, 29537.678000, 1230.048035, 1230.048035, 0.000000, X, Y) && !ellipse(35648.130200, 25743.150200, 653.122419, 653.122419, 0.000000, X, Y) && !ellipse(31383.084800, 22330.388600, 342.477610, 342.477610, 0.000000, X, Y) && !ellipse(26495.110000, 30423.570000, 2584.080074, 2584.080074, 0.000000, X, Y) && !ellipse(32574.973358, 25217.688049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32218.132111, 27182.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25179.110474, 27190.478363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31735.123871, 23969.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31303.770000, 23746.106000, 1380.616040, 1380.616040, 0.000000, X, Y) && !ellipse(25178.506000, 28660.432000, 1208.552035, 1208.552035, 0.000000, X, Y) && !ellipse(32777.964000, 24027.860000, 1470.688042, 1470.688042, 0.000000, X, Y)
[Thu Jul 19 05:15:50 2012] Writing fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src4.gif
[Thu Jul 19 05:27:16 2012] Mean detx,y = (-1131.35, 2138.74) 
[Thu Jul 19 05:27:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:29:48 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:29:48 2012] Setting source spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 05:29:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 19 06:53:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 06:53:57 2012] rmf not generated due to insufficient counts
[Fri Jul 20 12:25:58 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:25:58 2012] Error reading totcts from fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 12:26:01 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:01 2012] Using photon index=1.80, rate=0.0364, arf fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src4.arf
[Fri Jul 20 12:26:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:01 2012] Updating source flux to 3.4e-13
[Fri Jul 20 12:26:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting