[Tue Jul 17 11:25:24 2012] Detection parameters:
  Position = (461.1, 225.2) = 4 12 47.18 10 21 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.8 +/- 17.8
  Background counts = 39.2
  Rate = 0.002 +/- 0.0003

[Tue Jul 17 11:25:25 2012] Off-axis axis estimate = 12.94'
[Tue Jul 17 15:30:45 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 15:30:45 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Tue Jul 17 15:30:45 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Tue Jul 17 15:30:45 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.90"
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jul 17 17:40:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src33.csv
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jul 17 17:40:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src33.csv
[Tue Jul 17 17:40:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jul 17 17:40:27 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Jul 17 23:41:32 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 17.285744 pixels away
[Tue Jul 17 23:41:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:32 2012] Assessing source extent using major
[Tue Jul 17 23:41:32 2012] Source does appear to be extended
[Tue Jul 17 23:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 06:54:52 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:54:52 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Wed Jul 18 06:54:52 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Wed Jul 18 06:54:52 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 12.90"
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src30.ximg exists
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Jul 18 09:19:45 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src30 appears to have run properly
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Jul 18 09:19:46 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Jul 18 11:51:10 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 13.130708 pixels away
[Wed Jul 18 11:51:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:10 2012] Assessing source extent using major
[Wed Jul 18 11:51:10 2012] Source does appear to be extended
[Wed Jul 18 11:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 05:15:51 2012] XMMSAS src. selection expression = ellipse(40068.857269, 19541.368164, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing source region out to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src26_src.reg
[Thu Jul 19 05:15:51 2012] Extracting stamp from image fullrun_mos1_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (424, 188) - (499, 263)
[Thu Jul 19 05:15:51 2012] XMMSAS bgd. selection expression = annulus(40068.857269, 19541.368164, 1087.500000, 2175.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src26.gif
[Thu Jul 19 06:04:02 2012] Mean detx,y = (-5585.19, 13584.35) 
[Thu Jul 19 06:04:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 06:04:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 06:04:11 2012] Setting source spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jul 19 06:04:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jul 19 21:19:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 19 21:19:01 2012] rmf not generated due to insufficient counts
[Fri Jul 20 12:26:00 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:26:00 2012] Error reading totcts from fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jul 20 12:26:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:02 2012] Using photon index=1.80, rate=0.00209, arf fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src26.arf
[Fri Jul 20 12:26:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:02 2012] Updating source flux to 4.1e-14
[Fri Jul 20 12:26:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting