[Tue Jul 17 11:25:24 2012] Detection parameters:
  Position = (361.3, 257.1) = 4 13 16.62 10 24 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.8 +/- 26.8
  Background counts = 205.0
  Rate = 0.004 +/- 0.0005

[Tue Jul 17 11:25:25 2012] Off-axis axis estimate = 5.45'
[Tue Jul 17 15:30:45 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 15:30:45 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Tue Jul 17 15:30:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.106
[Tue Jul 17 15:30:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.15"
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src21.csv
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src21.csv
[Tue Jul 17 17:40:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jul 17 17:40:27 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Tue Jul 17 23:41:32 2012] Source 25 is offset by -6.223727 and 3.427027 pixels which is larger than
2 X fitted extent = 1.056285 x 1.056285, not incorporating fit results
[Tue Jul 17 23:41:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:32 2012] Assessing source extent using major
[Tue Jul 17 23:41:32 2012] Source does appear to be extended
[Tue Jul 17 23:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 06:54:52 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:54:52 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Wed Jul 18 06:54:52 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.106
[Wed Jul 18 06:54:52 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.15"
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src20.csv
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src20.csv
[Wed Jul 18 09:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jul 18 09:19:46 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Jul 18 11:51:10 2012] Spatial fit model total counts = 2310.710000, observed total counts = 2301.000000
[Wed Jul 18 11:51:10 2012] Offset between fit and detection position for source 25 = 0.143213 pixels
[Wed Jul 18 11:51:10 2012] 2332.082000 total counts/ 2188.400000 bgd. counts: snr = 3.071419
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.143213 pixels
  Position = (361.3, 257.2) = 4 13 16.61 10 24 2.5
  Extent = 4.3 (3.2-5.3)", rotation angle = 0
  Source counts = 143.7 +/- 48.3
  Background counts = 2188.4
  Rate = 0.002 +/- 0.0007
[Wed Jul 18 11:51:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 11:51:10 2012] Source does appear to be extended
[Wed Jul 18 11:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 05:15:51 2012] XMMSAS src. selection expression = ellipse(31383.084800, 22330.388600, 256.858207, 256.858207, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing source region out to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src25_src.reg
[Thu Jul 19 05:15:51 2012] Extracting stamp from image fullrun_mos1_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (347, 242) - (376, 272)
[Thu Jul 19 05:15:51 2012] XMMSAS bgd. selection expression = annulus(31383.084800, 22330.388600, 428.097012, 856.194025, X, Y) && !ellipse(31735.123871, 23969.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31303.770000, 23746.106000, 1380.616040, 1380.616040, 0.000000, X, Y) && !ellipse(32777.964000, 24027.860000, 1470.688042, 1470.688042, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src25.gif
[Thu Jul 19 05:49:37 2012] Mean detx,y = (-4136.23, 4587.42) 
[Thu Jul 19 05:49:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:49:46 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:49:46 2012] Setting source spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jul 19 05:49:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jul 20 12:25:59 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:26:00 2012] Error reading totcts from fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jul 20 12:26:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:02 2012] Using photon index=1.80, rate=0.00209, arf fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src25.arf
[Fri Jul 20 12:26:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:02 2012] Updating source flux to 3e-14
[Fri Jul 20 12:26:08 2012] Flag b found in src. 25 procflags, skipping spectral fitting