[Tue Jul 17 11:25:23 2012] Detection parameters:
  Position = (410.6, 296.3) = 4 13 2.06 10 26 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.4 +/- 20.6
  Background counts = 105.5
  Rate = 0.005 +/- 0.0005

[Tue Jul 17 11:25:25 2012] Off-axis axis estimate = 8.13'
[Tue Jul 17 15:30:45 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 15:30:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 17 15:30:45 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Tue Jul 17 15:30:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Tue Jul 17 15:30:45 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.50"
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src20.csv
[Tue Jul 17 17:40:26 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jul 17 17:40:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src20.csv
[Tue Jul 17 17:40:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jul 17 17:40:27 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jul 17 17:40:27 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Jul 17 23:41:32 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.581362 pixels away
[Tue Jul 17 23:41:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 23:41:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 23:41:32 2012] Assessing source extent using major
[Tue Jul 17 23:41:32 2012] Source does appear to be extended
[Tue Jul 17 23:41:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 06:54:52 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 06:54:52 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Wed Jul 18 06:54:52 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Wed Jul 18 06:54:52 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 10.50"
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src19.csv
[Wed Jul 18 09:19:45 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Jul 18 09:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src19.csv
[Wed Jul 18 09:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Jul 18 09:19:46 2012] fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Jul 18 09:19:46 2012] Fit fullrun_mos1_xmm0109880101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Jul 18 11:51:10 2012] Spatial fit model total counts = 931.463000, observed total counts = 906.000000
[Wed Jul 18 11:51:10 2012] Offset between fit and detection position for source 21 = 0.355458 pixels
[Wed Jul 18 11:51:10 2012] 895.139000 total counts/ 599.370000 bgd. counts: snr = 12.081063
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.355458 pixels
  Position = (410.3, 296.5) = 4 13 2.15 10 26 53.1
  Extent = 8.2 (6.9-9.8)", rotation angle = 0
  Source counts = 295.8 +/- 29.9
  Background counts = 599.4
  Rate = 0.004 +/- 0.0004
[Wed Jul 18 11:51:10 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 11:51:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 11:51:10 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 11:51:10 2012] Source does appear to be extended
[Wed Jul 18 11:51:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 05:15:51 2012] XMMSAS src. selection expression = ellipse(35648.130200, 25743.150200, 489.841814, 489.841814, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing source region out to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src21_src.reg
[Thu Jul 19 05:15:51 2012] Extracting stamp from image fullrun_mos1_xmm0109880101_pi300-10000_cl_sm2.00.img.gz, (382, 268) - (438, 325)
[Thu Jul 19 05:15:51 2012] XMMSAS bgd. selection expression = annulus(35648.130200, 25743.150200, 816.403023, 1632.806047, X, Y) && !ellipse(32777.964000, 24027.860000, 1470.688042, 1470.688042, 0.000000, X, Y)
[Thu Jul 19 05:15:51 2012] Writing fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src21.gif
[Thu Jul 19 05:49:12 2012] Mean detx,y = (-168.51, 8280.79) 
[Thu Jul 19 05:49:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 05:49:29 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 05:49:29 2012] Setting source spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jul 19 05:49:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jul 20 12:25:59 2012] Updating aperture counts using extracted products
[Fri Jul 20 12:25:59 2012] Error reading totcts from fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jul 20 12:26:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 12:26:02 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos1_xmm0109880101_pi300-10000_pass1_cl_src21.arf
[Fri Jul 20 12:26:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 12:26:02 2012] Updating source flux to 7e-14