[Tue Dec 20 04:47:21 2011] Detection parameters:
  Position = (317.7, 328.0) = 3 38 35.79 9 58 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 629.7 +/- 35.5
  Background counts = 123.1
  Rate = 0.06 +/- 0.003

[Tue Dec 20 04:47:23 2011] Off-axis axis estimate = 2.56'
[Tue Dec 20 07:57:49 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 07:57:49 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Dec 20 07:57:49 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Tue Dec 20 07:57:49 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.71"
[Tue Dec 20 11:09:54 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Dec 20 11:09:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_src5.csv
[Tue Dec 20 11:09:54 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Dec 20 11:09:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_src5.csv
[Tue Dec 20 11:09:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 11:09:55 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Dec 20 11:09:55 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Dec 20 11:09:55 2011] Fit fullrun_mos2_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Dec 20 11:10:30 2011] Warning, spatial fit 5 centroid is now closest to src. 3
[Tue Dec 20 11:10:30 2011] Source 2 is offset by -3.892059 and 1.171470 pixels which is larger than
2 X fitted extent = 2.593149 x 2.593149, not incorporating fit results
[Tue Dec 20 11:10:30 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:10:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:10:30 2011] Assessing source extent using major
[Tue Dec 20 11:10:30 2011] Source does appear to be extended
[Tue Dec 20 11:10:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 11:10:30 2011] Source is confused with source 3
[Tue Dec 20 15:27:47 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 15:27:47 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Dec 20 15:27:47 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Tue Dec 20 15:27:47 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.71"
[Tue Dec 20 18:04:38 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Dec 20 18:04:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_src4.csv
[Tue Dec 20 18:04:38 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Dec 20 18:04:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_src4.csv
[Tue Dec 20 18:04:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 18:04:39 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Dec 20 18:04:39 2011] fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Dec 20 18:04:39 2011] Fit fullrun_mos2_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Dec 20 18:05:03 2011] Source 2 is offset by 4.801320 and 0.129079 pixels which is larger than
2 X fitted extent = 1.609563 x 1.609563, not incorporating fit results
[Tue Dec 20 18:05:03 2011] Spatial fit model total counts = 24449.300000, observed total counts = 24467.000000
[Tue Dec 20 18:05:03 2011] Offset between fit and detection position for source 2 = 5.032127 pixels
[Tue Dec 20 18:05:03 2011] Warning, changing simple spatial fit ID from 4 to 3
[Tue Dec 20 18:05:03 2011] 21265.610000 total counts/ 13308.200000 bgd. counts: snr = 68.978235
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.032127 pixels
  Position = (319.2, 332.8) = 3 38 35.35 9 59 19.4
  Extent = 30.8 (30.7-61.7)", rotation angle = 0
  Source counts = 7957.4 +/- 145.8
  Background counts = 13308.2
  Rate = 0.6 +/- 0.01
[Tue Dec 20 18:05:03 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 18:05:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 18:05:03 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 18:05:03 2011] Source does appear to be extended
[Tue Dec 20 18:05:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 08:48:10 2011] Counts = 7957.410000, rescaling region sizes by 2.000000
[Tue Dec 27 08:48:10 2011] XMMSAS src. selection expression = ellipse(27720.980000, 28905.562000, 3699.552106, 3699.552106, 0.000000, X, Y)
[Tue Dec 27 08:48:10 2011] Writing source region out to fullrun_mos2_xmm0109870101_pi300-10000_pass1_cl_src2_src.reg
[Tue Dec 27 08:48:10 2011] Extracting stamp from image fullrun_mos2_xmm0109870101_pi300-10000_cl_sm2.00.img.gz, (107, 120) - (532, 545)
[Tue Dec 27 08:48:10 2011] XMMSAS bgd. selection expression = annulus(27720.980000, 28905.562000, 12331.840355, 24663.680710, X, Y) && !ellipse(26124.547480, 27312.165000, 1120.256032, 1120.256032, 0.000000, X, Y) && !ellipse(26201.896000, 28140.634000, 1215.728035, 652.712819, 90.000000, X, Y) && !ellipse(26913.908000, 28104.704000, 911.248026, 911.248026, 0.000000, X, Y) && !ellipse(27033.003265, 25879.974487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27436.722000, 29832.368000, 1267.688036, 1267.688036, 0.000000, X, Y) && !ellipse(28183.531006, 27085.349823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28509.978000, 27817.020000, 1287.024037, 1287.024037, 0.000000, X, Y) && !ellipse(24574.030000, 30145.286000, 1274.120037, 1274.120037, 0.000000, X, Y) && !ellipse(27277.798000, 25412.946000, 1103.112032, 1103.112032, 0.000000, X, Y) && !ellipse(27937.866455, 25707.270142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24140.954193, 26236.659088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28865.593400, 28994.088000, 1305.640038, 1305.640038, 0.000000, X, Y) && !ellipse(25640.838654, 25100.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.748169, 29857.532288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28955.377228, 27111.637268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.156000, 30366.264000, 1297.744037, 1297.744037, 0.000000, X, Y) && !ellipse(24672.466000, 28187.002000, 1237.472036, 1237.472036, 0.000000, X, Y)
[Tue Dec 27 08:48:10 2011] Writing fullrun_mos2_xmm0109870101_pi300-10000_pass1_cl_src2.gif
[Tue Dec 27 09:02:25 2011] Mean detx,y = (945.01, 444.75) 
[Tue Dec 27 09:02:32 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 09:29:54 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 09:29:54 2011] Setting source spectrum file to fullrun_mos2_xmm0109870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Dec 27 09:29:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0109870101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Dec 27 16:02:08 2011] Updating aperture counts using extracted products
[Tue Dec 27 16:02:08 2011] Error reading totcts from fullrun_mos2_xmm0109870101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Dec 27 16:02:10 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 16:02:10 2011] Using photon index=1.80, rate=0.637, arf fullrun_mos2_xmm0109870101_pi300-10000_pass1_cl_src2.arf
[Tue Dec 27 16:02:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 16:02:10 2011] Updating source flux to 5.5e-12
[Tue Dec 27 16:03:52 2011] Flag b found in src. 2 procflags, skipping spectral fitting
[Tue Dec 27 16:03:52 2011] Flag c found in src. 2 procflags, skipping spectral fitting