[Tue Dec 20 04:46:27 2011] Detection parameters:
  Position = (304.0, 295.1) = 3 38 39.81 9 56 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.3 +/- 19.4
  Background counts = 52.8
  Rate = 0.02 +/- 0.003

[Tue Dec 20 04:46:28 2011] Off-axis axis estimate = 0.47'
[Tue Dec 20 06:08:11 2011] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 06:08:11 2011] Initial guess for spatial extent in simple fitting = 6.67"
[Tue Dec 20 06:08:11 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969
[Tue Dec 20 06:08:11 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 6.67"
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src8.ximg exists
[Tue Dec 20 07:57:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src8.csv
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Dec 20 07:57:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src8.csv
[Tue Dec 20 07:57:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Dec 20 07:57:48 2011] Fit fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Dec 20 11:10:16 2011] Source 8 is offset by 1.178197 and -7.048583 pixels which is larger than
2 X fitted extent = 3.686510 x 3.686510, not incorporating fit results
[Tue Dec 20 11:10:16 2011] Source 8 is offset by 5.772776 and -1.034353 pixels which is larger than
2 X fitted extent = 3.953678 x 3.953678, not incorporating fit results
[Tue Dec 20 11:10:16 2011] Source 8 is offset by 6.731318 and -0.859456 pixels which is larger than
2 X fitted extent = 1.508161 x 1.508161, not incorporating fit results
[Tue Dec 20 11:10:16 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:10:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:10:16 2011] Assessing source extent using major
[Tue Dec 20 11:10:16 2011] Source does appear to be extended
[Tue Dec 20 11:10:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 13:12:51 2011] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 13:12:51 2011] Initial guess for spatial extent in simple fitting = 6.67"
[Tue Dec 20 13:12:51 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969
[Tue Dec 20 13:12:51 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 6.67"
[Tue Dec 20 15:27:46 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src8.ximg exists
[Tue Dec 20 15:27:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src8.csv
[Tue Dec 20 15:27:46 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Dec 20 15:27:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src8.csv
[Tue Dec 20 15:27:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:27:47 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Dec 20 15:27:47 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Dec 20 15:27:47 2011] Fit fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Dec 20 18:04:54 2011] Source 8 is offset by 1.210663 and -7.048583 pixels which is larger than
2 X fitted extent = 3.835927 x 3.835927, not incorporating fit results
[Tue Dec 20 18:04:54 2011] Source 8 is offset by 5.756295 and -1.004123 pixels which is larger than
2 X fitted extent = 4.004823 x 4.004823, not incorporating fit results
[Tue Dec 20 18:04:54 2011] Source 8 is offset by 6.731318 and -0.882904 pixels which is larger than
2 X fitted extent = 1.586386 x 1.586386, not incorporating fit results
[Tue Dec 20 18:04:54 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 18:04:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 18:04:54 2011] Assessing source extent using major
[Tue Dec 20 18:04:54 2011] Source does appear to be extended
[Tue Dec 20 18:04:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 05:55:09 2011] XMMSAS src. selection expression = ellipse(26402.988708, 25623.501312, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 05:55:09 2011] Writing source region out to fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src8_src.reg
[Tue Dec 27 05:55:09 2011] Extracting stamp from image fullrun_mos1_xmm0109870101_pi300-10000_cl_sm2.00.img.gz, (267, 258) - (342, 333)
[Tue Dec 27 05:55:09 2011] XMMSAS bgd. selection expression = annulus(26402.988708, 25623.501312, 1087.500000, 2175.000000, X, Y) && !ellipse(26141.661300, 27304.242800, 1119.944032, 1119.944032, 0.000000, X, Y) && !ellipse(27196.486694, 25979.246033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.284332, 26578.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24977.434448, 25628.349396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.150055, 28394.433258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.165192, 27800.858978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24166.081390, 27685.641327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29222.104000, 26298.334000, 1220.352035, 1220.352035, 0.000000, X, Y) && !ellipse(27970.428000, 30243.686000, 2603.136075, 2603.136075, 0.000000, X, Y)
[Tue Dec 27 05:55:09 2011] Writing fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src8.gif
[Tue Dec 27 06:11:39 2011] Mean detx,y = (-1503.48, -897.15) 
[Tue Dec 27 06:11:43 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:12:10 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:12:11 2011] Setting source spectrum file to fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Dec 27 06:12:11 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Dec 27 07:29:29 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 07:29:29 2011] rmf not generated due to insufficient counts
[Tue Dec 27 16:02:05 2011] Updating aperture counts using extracted products
[Tue Dec 27 16:02:05 2011] Error reading totcts from fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Dec 27 16:02:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 16:02:07 2011] Using photon index=1.80, rate=0.024, arf fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src8.arf
[Tue Dec 27 16:02:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 16:02:07 2011] Updating source flux to 2.4e-13
[Tue Dec 27 16:02:13 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting