[Tue Dec 20 04:46:27 2011] Detection parameters:
  Position = (291.0, 341.4) = 3 38 43.64 9 59 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.6 +/- 18.2
  Background counts = 58.4
  Rate = 0.03 +/- 0.004

[Tue Dec 20 04:46:28 2011] Off-axis axis estimate = 3.16'
[Tue Dec 20 06:08:11 2011] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 06:08:11 2011] Initial guess for spatial extent in simple fitting = 8.01"
[Tue Dec 20 06:08:11 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.775
[Tue Dec 20 06:08:11 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 8.01"
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Dec 20 07:57:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src7.csv
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Dec 20 07:57:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src7.csv
[Tue Dec 20 07:57:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Dec 20 07:57:48 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Dec 20 07:57:48 2011] Fit fullrun_mos1_xmm0109870101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Dec 20 11:10:16 2011] Source 10 is offset by 5.790090 and -7.585071 pixels which is larger than
2 X fitted extent = 7.365425 x 7.365425, not incorporating fit results
[Tue Dec 20 11:10:16 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 11:10:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 11:10:16 2011] Assessing source extent using major
[Tue Dec 20 11:10:16 2011] Source does appear to be extended
[Tue Dec 20 11:10:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 13:12:51 2011] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 13:12:51 2011] Initial guess for spatial extent in simple fitting = 8.01"
[Tue Dec 20 13:12:51 2011] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.775
[Tue Dec 20 13:12:51 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 8.01"
[Tue Dec 20 15:27:46 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Dec 20 15:27:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src7.csv
[Tue Dec 20 15:27:46 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Dec 20 15:27:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src7.csv
[Tue Dec 20 15:27:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 15:27:47 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Dec 20 15:27:47 2011] fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Dec 20 15:27:47 2011] Fit fullrun_mos1_xmm0109870101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Dec 20 18:04:54 2011] Source 10 is offset by -3.166852 and 6.791550 pixels which is larger than
2 X fitted extent = 2.896327 x 2.896327, not incorporating fit results
[Tue Dec 20 18:04:54 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 21.693608 pixels away
[Tue Dec 20 18:04:54 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 18:04:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 18:04:54 2011] Assessing source extent using major
[Tue Dec 20 18:04:54 2011] Source does appear to be extended
[Tue Dec 20 18:04:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 05:55:09 2011] XMMSAS src. selection expression = ellipse(25271.271851, 29655.574829, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Dec 27 05:55:09 2011] Writing source region out to fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src10_src.reg
[Tue Dec 27 05:55:09 2011] Extracting stamp from image fullrun_mos1_xmm0109870101_pi300-10000_cl_sm2.00.img.gz, (254, 304) - (329, 379)
[Tue Dec 27 05:55:09 2011] XMMSAS bgd. selection expression = annulus(25271.271851, 29655.574829, 1087.500000, 2175.000000, X, Y) && !ellipse(26141.661300, 27304.242800, 1119.944032, 1119.944032, 0.000000, X, Y) && !ellipse(27265.204000, 29166.356000, 1303.368038, 1303.368038, 0.000000, X, Y) && !ellipse(26489.996674, 29409.312897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28306.671265, 29097.161102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24166.081390, 27685.641327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26818.362732, 29946.770477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.639313, 29611.881012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27970.428000, 30243.686000, 2603.136075, 2603.136075, 0.000000, X, Y)
[Tue Dec 27 05:55:09 2011] Writing fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src10.gif
[Tue Dec 27 06:10:59 2011] Mean detx,y = (2047.17, -2699.75) 
[Tue Dec 27 06:11:02 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 06:11:32 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 06:11:33 2011] Setting source spectrum file to fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 27 06:11:33 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Dec 27 07:29:23 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 07:29:23 2011] rmf not generated due to insufficient counts
[Tue Dec 27 16:02:05 2011] Updating aperture counts using extracted products
[Tue Dec 27 16:02:05 2011] Error reading totcts from fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue Dec 27 16:02:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 16:02:07 2011] Using photon index=1.80, rate=0.0254, arf fullrun_mos1_xmm0109870101_pi300-10000_pass1_cl_src10.arf
[Tue Dec 27 16:02:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 16:02:07 2011] Updating source flux to 2.7e-13
[Tue Dec 27 16:02:13 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting