[Tue May 29 15:13:45 2012] Detection parameters:
  Position = (283.4, 370.6) = 1 25 41.93 1 49 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.8 +/- 8.1
  Background counts = 5.8
  Rate = 0.006 +/- 0.001

[Tue May 29 15:13:45 2012] Off-axis axis estimate = 5.34'
[Tue May 29 15:44:04 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Tue May 29 15:44:04 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Tue May 29 15:44:04 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.930
[Tue May 29 15:44:04 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.10"
[Tue May 29 16:07:07 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_src9.ximg exists
[Tue May 29 16:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_src9.csv
[Tue May 29 16:07:07 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue May 29 16:07:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_src9.csv
[Tue May 29 16:07:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 16:07:07 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue May 29 16:07:07 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue May 29 16:07:07 2012] Fit fullrun_mos2_xmm0109860401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue May 29 16:07:14 2012] Spatial fit model total counts = 85.450700, observed total counts = 86.000000
[Tue May 29 16:07:14 2012] Offset between fit and detection position for source 5 = 0.114134 pixels
[Tue May 29 16:07:14 2012] 85.118300 total counts/ 59.830100 bgd. counts: snr = 3.269325
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.114134 pixels
  Position = (283.3, 370.5) = 1 25 41.96 1 49 49.6
  Extent = 5.1 (3.6-7.0)", rotation angle = 0
  Source counts = 25.3 +/- 9.2
  Background counts = 59.8
  Rate = 0.003 +/- 0.001
[Tue May 29 16:07:14 2012] Vigneting correction estimate = 1.000000
[Tue May 29 16:07:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 16:07:14 2012] Assessing source extent using major axis lower bound
[Tue May 29 16:07:14 2012] Source does appear to be extended
[Tue May 29 16:07:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 16:40:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 16:40:34 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Tue May 29 16:40:34 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814
[Tue May 29 16:40:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.06"
[Tue May 29 17:02:28 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_src9.ximg exists
[Tue May 29 17:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_src9.csv
[Tue May 29 17:02:28 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue May 29 17:02:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_src9.csv
[Tue May 29 17:02:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:02:28 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue May 29 17:02:28 2012] fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue May 29 17:02:28 2012] Fit fullrun_mos2_xmm0109860401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue May 29 17:02:35 2012] Spatial fit model total counts = 85.999800, observed total counts = 86.000000
[Tue May 29 17:02:35 2012] Offset between fit and detection position for source 5 = 0.015884 pixels
[Tue May 29 17:02:35 2012] 85.764400 total counts/ 60.419900 bgd. counts: snr = 3.260571
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.015884 pixels
  Position = (283.3, 370.6) = 1 25 41.96 1 49 49.6
  Extent = 5.1 (3.6-6.9)", rotation angle = 0
  Source counts = 25.3 +/- 9.3
  Background counts = 60.4
  Rate = 0.003 +/- 0.001
[Tue May 29 17:02:35 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:02:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:02:35 2012] Assessing source extent using major axis lower bound
[Tue May 29 17:02:35 2012] Source does appear to be extended
[Tue May 29 17:02:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:37:39 2012] XMMSAS src. selection expression = ellipse(24600.667400, 32189.956200, 306.802209, 306.802209, 0.000000, X, Y)
[Tue May 29 17:37:39 2012] Writing source region out to fullrun_mos2_xmm0109860401_pi300-10000_pass1_cl_src5_src.reg
[Tue May 29 17:37:39 2012] Extracting stamp from image fullrun_mos2_xmm0109860401_pi300-10000_cl_sm2.00.img.gz, (266, 353) - (301, 388)
[Tue May 29 17:37:39 2012] XMMSAS bgd. selection expression = annulus(24600.667400, 32189.956200, 511.337015, 1022.674029, X, Y)
[Tue May 29 17:37:39 2012] Writing fullrun_mos2_xmm0109860401_pi300-10000_pass1_cl_src5.gif
[Tue May 29 17:39:28 2012] Mean detx,y = (4650.59, 3759.68) 
[Tue May 29 17:39:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 29 17:39:36 2012] Binned source spectrum to 10 counts/bin
[Tue May 29 17:39:36 2012] Setting source spectrum file to fullrun_mos2_xmm0109860401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 17:39:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109860401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 29 17:45:12 2012] Not generating rmf since there are only 25 counts
[Tue May 29 17:45:12 2012] rmf not generated due to insufficient counts
[Tue May 29 17:46:03 2012] Updating aperture counts using extracted products
[Tue May 29 17:46:03 2012] Error reading totcts from fullrun_mos2_xmm0109860401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 29 17:46:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 29 17:46:03 2012] Using photon index=1.80, rate=0.00324, arf fullrun_mos2_xmm0109860401_pi300-10000_pass1_cl_src5.arf
[Tue May 29 17:46:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 29 17:46:03 2012] Updating source flux to 5.6e-14
[Tue May 29 17:46:22 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting