[Tue May 29 15:13:27 2012] Detection parameters: Position = (320.1, 311.9) = 1 25 31.29 1 45 33.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 825.5 +/- 35.1 Background counts = 8.2 Rate = 0.1 +/- 0.005 [Tue May 29 15:13:28 2012] Off-axis axis estimate = 1.85' [Tue May 29 15:28:04 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Tue May 29 15:28:04 2012] Initial guess for spatial extent in simple fitting = 7.35" [Tue May 29 15:28:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834 [Tue May 29 15:28:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35" [Tue May 29 15:44:03 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass0_src1.ximg exists [Tue May 29 15:44:03 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass0_src1_1.ximg exists [Tue May 29 15:44:03 2012] Fit fullrun_mos1_xmm0109860401_pi300-10000_cl_pass0_src1 appears to have run properly [Tue May 29 15:44:03 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Tue May 29 15:44:03 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Tue May 29 15:44:03 2012] Fit fullrun_mos1_xmm0109860401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Tue May 29 16:07:12 2012] Spatial fit model total counts = 1388.060000, observed total counts = 1387.000000 [Tue May 29 16:07:12 2012] Offset between fit and detection position for source 1 = 0.481123 pixels [Tue May 29 16:07:12 2012] 1396.222000 total counts/ 474.945000 bgd. counts: snr = 42.273535 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.481123 pixels Position = (319.9, 311.5) = 1 25 31.35 1 45 32.5 Extent = 11.6 (10.7-12.9)", rotation angle = 0 Source counts = 921.3 +/- 37.4 Background counts = 474.9 Rate = 0.1 +/- 0.005 [Tue May 29 16:07:12 2012] Vigneting correction estimate = 1.000000 [Tue May 29 16:07:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 16:07:12 2012] Assessing source extent using major axis lower bound [Tue May 29 16:07:12 2012] Source does appear to be extended [Tue May 29 16:07:12 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 29 16:07:12 2012] Source is confused with source 9 [Tue May 29 16:22:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 29 16:22:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue May 29 16:22:30 2012] Initial guess for spatial extent in simple fitting = 11.62" [Tue May 29 16:22:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.043 [Tue May 29 16:22:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.62" [Tue May 29 16:40:33 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_src1.ximg exists [Tue May 29 16:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_src1.csv [Tue May 29 16:40:33 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_src1_1.ximg exists [Tue May 29 16:40:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_src1.csv [Tue May 29 16:40:33 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 29 16:40:33 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Tue May 29 16:40:33 2012] fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Tue May 29 16:40:33 2012] Fit fullrun_mos1_xmm0109860401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Tue May 29 17:02:33 2012] Spatial fit model total counts = 1707.490000, observed total counts = 1705.000000 [Tue May 29 17:02:33 2012] Offset between fit and detection position for source 1 = 0.131447 pixels [Tue May 29 17:02:33 2012] 1660.661000 total counts/ 645.571000 bgd. counts: snr = 39.951450 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.131447 pixels Position = (319.9, 311.6) = 1 25 31.34 1 45 33.0 Extent = 12.5 (11.7-13.5)", rotation angle = 0 Source counts = 1015.1 +/- 40.8 Background counts = 645.6 Rate = 0.1 +/- 0.005 [Tue May 29 17:02:33 2012] Vigneting correction estimate = 1.000000 [Tue May 29 17:02:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 29 17:02:33 2012] Assessing source extent using major axis lower bound [Tue May 29 17:02:33 2012] Source does appear to be extended [Tue May 29 17:02:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 29 17:16:14 2012] Counts = 1015.090000, rescaling region sizes by 2.000000 [Tue May 29 17:16:14 2012] XMMSAS src. selection expression = ellipse(27784.451800, 27058.049000, 1494.204043, 1494.204043, 0.000000, X, Y) [Tue May 29 17:16:14 2012] Writing source region out to fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1_src.reg [Tue May 29 17:16:14 2012] Extracting stamp from image fullrun_mos1_xmm0109860401_pi300-10000_cl_sm2.00.img.gz, (234, 226) - (406, 397) [Tue May 29 17:16:14 2012] XMMSAS bgd. selection expression = annulus(27784.451800, 27058.049000, 4980.680143, 9961.360287, X, Y) && !ellipse(35567.093140, 28129.835693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30527.007800, 28208.560600, 374.452811, 374.452811, 0.000000, X, Y) && !ellipse(37405.331800, 29413.782600, 414.237612, 414.237612, 0.000000, X, Y) && !ellipse(24626.094421, 32289.940033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27682.440000, 27709.576000, 1207.848035, 1207.848035, 0.000000, X, Y) && !ellipse(28887.570435, 27177.752808, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 29 17:16:14 2012] Writing fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1.gif [Tue May 29 17:16:16 2012] Mean detx,y = (333.03, -1.37) [Tue May 29 17:16:17 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 29 17:20:10 2012] Binned source spectrum to 10 counts/bin [Tue May 29 17:20:11 2012] Setting source spectrum file to fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue May 29 17:20:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1_bgd.pi.gz [Tue May 29 17:46:03 2012] Updating aperture counts using extracted products [Tue May 29 17:46:03 2012] Error reading totcts from fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue May 29 17:46:03 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 29 17:46:03 2012] Using photon index=1.80, rate=0.13, arf fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1.arf [Tue May 29 17:46:03 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 29 17:46:03 2012] Updating source flux to 1.1e-12 [Tue May 29 17:46:04 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Tue May 29 17:46:22 2012] Reading fit data from xmm0109860401/analysis//spectral/fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1_pl.csv [Tue May 29 17:46:22 2012] Spectral fit parameter nH value = 8.27785e+21 [Tue May 29 17:46:22 2012] Spectral fit parameter PhoIndex value = 6.6896 [Tue May 29 17:46:22 2012] Failed to get F(0.3-8.0) from xmm0109860401/analysis//spectral/fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Tue May 29 17:46:22 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 29 17:46:22 2012] Using Nh = 8.3e+21, photon index=6.69, rate=0.13, arf fullrun_mos1_xmm0109860401_pi300-10000_pass1_cl_src1.arf [Tue May 29 17:46:22 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 29 17:46:22 2012] Updating source flux to 6.6e-13