[Fri Aug 10 07:19:47 2012] Detection parameters:
  Position = (339.1, 233.3) = 1 25 27.25 1 40 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.3 +/- 6.9
  Background counts = 2.4
  Rate = 0.02 +/- 0.005

[Fri Aug 10 07:19:47 2012] Off-axis axis estimate = 5.57'
[Fri Aug 10 07:20:53 2012] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 07:20:53 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Aug 10 07:20:53 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.094
[Fri Aug 10 07:20:53 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.21"
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src5.ximg exists
[Fri Aug 10 07:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src5.csv
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Aug 10 07:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src5.csv
[Fri Aug 10 07:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 10 07:37:16 2012] Fit fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug 10 08:29:16 2012] Spatial fit model total counts = 50.508000, observed total counts = 47.000000
[Fri Aug 10 08:29:16 2012] Offset between fit and detection position for source 5 = 0.083498 pixels
[Fri Aug 10 08:29:16 2012] 51.959900 total counts/ 32.590800 bgd. counts: snr = 3.392829
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.083498 pixels
  Position = (339.0, 233.3) = 1 25 27.26 1 40 5.4
  Extent = 3.9 (2.5-6.0)", rotation angle = 0
  Source counts = 19.4 +/- 7.2
  Background counts = 32.6
  Rate = 0.01 +/- 0.004
[Fri Aug 10 08:29:16 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:16 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:29:16 2012] Source does appear to be extended
[Fri Aug 10 08:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:29:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:29:26 2012] Initial guess for spatial extent in simple fitting = 3.89"
[Fri Aug 10 08:29:26 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.771
[Fri Aug 10 08:29:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.89"
[Fri Aug 10 08:41:40 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 10 08:41:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 10 08:41:40 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 10 08:41:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 10 08:41:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:41:41 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 10 08:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 10 08:41:41 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 10 08:41:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 10 08:41:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:37:19 2012] Warning, spatial fit 3 centroid is now closest to src. 9
[Fri Aug 10 09:37:19 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:19 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 09:37:19 2012] Source does appear to be extended
[Fri Aug 10 09:37:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 09:37:29 2012] XMMSAS src. selection expression = ellipse(29448.247540, 20252.161600, 233.524207, 233.524207, 0.000000, X, Y)
[Fri Aug 10 09:37:29 2012] Writing source region out to fullrun_pn_xmm0109860201_pi300-10000_pass1_cl_src5_src.reg
[Fri Aug 10 09:37:29 2012] Extracting stamp from image fullrun_pn_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (326, 220) - (352, 247)
[Fri Aug 10 09:37:29 2012] XMMSAS bgd. selection expression = annulus(29448.247540, 20252.161600, 389.207011, 778.414022, X, Y)
[Fri Aug 10 09:37:29 2012] Writing fullrun_pn_xmm0109860201_pi300-10000_pass1_cl_src5.gif
[Fri Aug 10 09:38:17 2012] Mean detx,y = (4218.77, 5553.55) 
[Fri Aug 10 09:38:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 09:38:29 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 09:38:30 2012] Setting source spectrum file to fullrun_pn_xmm0109860201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug 10 09:38:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109860201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Aug 10 09:43:50 2012] Not generating rmf since there are only 19 counts
[Fri Aug 10 09:43:50 2012] rmf not generated due to insufficient counts
[Fri Aug 10 10:05:37 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:37 2012] Error reading totcts from fullrun_pn_xmm0109860201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug 10 10:05:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:39 2012] Using photon index=1.80, rate=0.00994, arf fullrun_pn_xmm0109860201_pi300-10000_pass1_cl_src5.arf
[Fri Aug 10 10:05:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:39 2012] Updating source flux to 4.5e-14
[Fri Aug 10 10:06:28 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting