[Fri Aug 10 07:19:47 2012] Detection parameters:
  Position = (150.3, 412.9) = 1 26 22.02 1 53 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.7 +/- 5.6
  Background counts = 1.3
  Rate = 0.01 +/- 0.003

[Fri Aug 10 07:19:47 2012] Off-axis axis estimate = 13.57'
[Fri Aug 10 07:20:53 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 07:20:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 07:20:53 2012] Initial guess for spatial extent in simple fitting = 13.21"
[Fri Aug 10 07:20:53 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.979
[Fri Aug 10 07:20:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.21"
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 10 07:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 10 07:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 10 07:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 10 07:37:16 2012] fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 10 07:37:16 2012] Fit fullrun_pn_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 10 08:29:16 2012] Spatial fit model total counts = 48.998400, observed total counts = 49.000000
[Fri Aug 10 08:29:16 2012] Offset between fit and detection position for source 3 = 0.293296 pixels
[Fri Aug 10 08:29:16 2012] 49.180600 total counts/ 37.037300 bgd. counts: snr = 1.995341
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.293296 pixels
  Position = (150.1, 412.7) = 1 26 22.08 1 53 5.5
  Extent = 5.8 (3.9-11.8)", rotation angle = 0
  Source counts = 12.1 +/- 7.0
  Background counts = 37.0
  Rate = 0.006 +/- 0.004
[Fri Aug 10 08:29:16 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:16 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:29:16 2012] Source does appear to be extended
[Fri Aug 10 08:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:29:16 2012] Deleting source due to low Poisson probability 0.9