[Fri Aug 10 07:20:27 2012] Detection parameters:
  Position = (336.1, 308.9) = 1 25 28.10 1 45 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 7.9
  Background counts = 5.9
  Rate = 0.005 +/- 0.001

[Fri Aug 10 07:20:27 2012] Off-axis axis estimate = 2.84'
[Fri Aug 10 08:06:20 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:06:20 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Fri Aug 10 08:06:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.753
[Fri Aug 10 08:06:20 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.85"
[Fri Aug 10 08:29:13 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_src9.ximg exists
[Fri Aug 10 08:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_src9.csv
[Fri Aug 10 08:29:13 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Aug 10 08:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_src9.csv
[Fri Aug 10 08:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:29:13 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 10 08:29:13 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 10 08:29:13 2012] Fit fullrun_mos2_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Aug 10 08:29:20 2012] Warning, spatial fit 9 centroid is now closest to src. 1
[Fri Aug 10 08:29:20 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:20 2012] Assessing source extent using major
[Fri Aug 10 08:29:20 2012] Source does appear to be extended
[Fri Aug 10 08:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:29:20 2012] Source is confused with source 1
[Fri Aug 10 09:12:09 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 09:12:09 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Fri Aug 10 09:12:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.753
[Fri Aug 10 09:12:09 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.85"
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src10.ximg exists
[Fri Aug 10 09:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src10.csv
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Aug 10 09:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src10.csv
[Fri Aug 10 09:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug 10 09:37:16 2012] Fit fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Aug 10 09:37:23 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 27.321768 pixels away
[Fri Aug 10 09:37:23 2012] Warning, spatial fit 10 centroid is now closest to src. 1
[Fri Aug 10 09:37:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:23 2012] Assessing source extent using major
[Fri Aug 10 09:37:23 2012] Source does appear to be extended
[Fri Aug 10 09:37:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 09:57:49 2012] XMMSAS src. selection expression = ellipse(29196.063599, 26829.848389, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 09:57:49 2012] Writing source region out to fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10_src.reg
[Fri Aug 10 09:57:49 2012] Extracting stamp from image fullrun_mos2_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (299, 271) - (374, 346)
[Fri Aug 10 09:57:49 2012] XMMSAS bgd. selection expression = annulus(29196.063599, 26829.848389, 1087.500000, 2175.000000, X, Y) && !ellipse(28555.694000, 26763.127000, 783.440823, 783.440823, 0.000000, X, Y) && !ellipse(27984.308228, 26942.825195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.350769, 27780.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31012.884000, 27883.290600, 466.396013, 466.396013, 0.000000, X, Y)
[Fri Aug 10 09:57:49 2012] Writing fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10.gif
[Fri Aug 10 10:00:56 2012] Mean detx,y = (-1390.74, 344.30) 
[Fri Aug 10 10:00:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 10:01:14 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 10:01:14 2012] Setting source spectrum file to fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Aug 10 10:01:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Aug 10 10:04:34 2012] Not generating rmf since there are only 27 counts
[Fri Aug 10 10:04:34 2012] rmf not generated due to insufficient counts
[Fri Aug 10 10:05:43 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:43 2012] Error reading totcts from fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Aug 10 10:05:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:44 2012] Using photon index=1.80, rate=0.00485, arf fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10.arf
[Fri Aug 10 10:05:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:44 2012] Updating source flux to 4.6e-14
[Fri Aug 10 10:06:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 10 10:06:28 2012] xmm0109860201/analysis//spectral/fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete