[Fri Aug 10 07:20:26 2012] Detection parameters:
  Position = (326.1, 307.8) = 1 25 31.00 1 45 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 395.8 +/- 24.4
  Background counts = 5.9
  Rate = 0.08 +/- 0.005

[Fri Aug 10 07:20:27 2012] Off-axis axis estimate = 2.12'
[Fri Aug 10 08:06:20 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:06:20 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Fri Aug 10 08:06:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 9, frac = 0.456
[Fri Aug 10 08:06:20 2012] Skipping simple spatial due to low active detector fraction
[Fri Aug 10 08:29:20 2012] Spatial fit model total counts = 328.126000, observed total counts = 322.000000
[Fri Aug 10 08:29:20 2012] Offset between fit and detection position for source 1 = 2.677825 pixels
[Fri Aug 10 08:29:20 2012] Warning, changing simple spatial fit ID from -1 to 9
[Fri Aug 10 08:29:20 2012] 297.018400 total counts/ 231.091000 bgd. counts: snr = 4.336850
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.677825 pixels
  Position = (328.8, 308.2) = 1 25 30.24 1 45 31.0
  Extent = 9.8 (4.3-15.4)", rotation angle = 0
  Source counts = 65.9 +/- 17.2
  Background counts = 231.1
  Rate = 0.01 +/- 0.003
[Fri Aug 10 08:29:20 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:20 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:29:20 2012] Source does appear to be extended
[Fri Aug 10 08:29:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:29:20 2012] Source is confused with source 11
[Fri Aug 10 08:29:20 2012] Source is confused with source 10
[Fri Aug 10 09:12:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 09:12:09 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Fri Aug 10 09:12:09 2012] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.156
[Fri Aug 10 09:12:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.79"
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 09:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 09:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 09:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 09:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 10 09:37:16 2012] fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 09:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 10 09:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:37:23 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Fri Aug 10 09:37:23 2012] Source 1 is offset by 0.000000 and 3.476149 pixels which is larger than
2 X fitted extent = 2.178639 x 2.178639, not incorporating fit results
[Fri Aug 10 09:37:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:23 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 09:37:23 2012] Source does appear to be extended
[Fri Aug 10 09:37:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 09:57:49 2012] XMMSAS src. selection expression = ellipse(28555.694000, 26763.127000, 587.580617, 587.580617, 0.000000, X, Y)
[Fri Aug 10 09:57:49 2012] Writing source region out to fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 10 09:57:49 2012] Extracting stamp from image fullrun_mos2_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (295, 274) - (363, 342)
[Fri Aug 10 09:57:49 2012] XMMSAS bgd. selection expression = annulus(28555.694000, 26763.127000, 979.301028, 1958.602056, X, Y) && !ellipse(27984.308228, 26942.825195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.350769, 27780.861298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29196.063599, 26829.848389, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 09:57:49 2012] Writing fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 10 09:57:52 2012] Mean detx,y = (-846.30, 39.19) 
[Fri Aug 10 09:57:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 09:58:05 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 09:58:06 2012] Setting source spectrum file to fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 09:58:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 10 10:02:42 2012] Not generating rmf since there are only 65 counts
[Fri Aug 10 10:02:42 2012] rmf not generated due to insufficient counts
[Fri Aug 10 10:05:42 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:42 2012] Error reading totcts from fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 10:05:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:43 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 10 10:05:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:43 2012] Updating source flux to 1.1e-13
[Fri Aug 10 10:06:27 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Aug 10 10:06:27 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Aug 10 10:06:27 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 10 10:06:28 2012] xmm0109860201/analysis//spectral/fullrun_mos2_xmm0109860201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete