[Fri Aug 10 07:20:07 2012] Detection parameters:
  Position = (356.9, 321.1) = 1 25 22.07 1 46 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 8.8
  Background counts = 4.3
  Rate = 0.009 +/- 0.002

[Fri Aug 10 07:20:07 2012] Off-axis axis estimate = 4.55'
[Fri Aug 10 07:37:17 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 07:37:17 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Fri Aug 10 07:37:17 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Fri Aug 10 07:37:17 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.70"
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 10 08:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 10 08:06:20 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 10 08:29:18 2012] Spatial fit model total counts = 84.361800, observed total counts = 81.000000
[Fri Aug 10 08:29:18 2012] Offset between fit and detection position for source 7 = 0.086129 pixels
[Fri Aug 10 08:29:18 2012] 82.158200 total counts/ 49.517700 bgd. counts: snr = 4.638489
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.086129 pixels
  Position = (356.9, 321.2) = 1 25 22.08 1 46 27.6
  Extent = 5.3 (3.0-7.6)", rotation angle = 0
  Source counts = 32.6 +/- 9.1
  Background counts = 49.5
  Rate = 0.006 +/- 0.002
[Fri Aug 10 08:29:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:18 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:29:18 2012] Source does appear to be extended
[Fri Aug 10 08:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:29:18 2012] Source is confused with source 8
[Fri Aug 10 08:41:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:41:41 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Fri Aug 10 08:41:41 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.363
[Fri Aug 10 08:41:41 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.28"
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 10 09:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 10 09:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 10 09:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 10 09:12:09 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 10 09:37:21 2012] Spatial fit model total counts = 77.758600, observed total counts = 76.000000
[Fri Aug 10 09:37:21 2012] Offset between fit and detection position for source 7 = 0.119083 pixels
[Fri Aug 10 09:37:21 2012] 65.121200 total counts/ 29.492100 bgd. counts: snr = 6.560728
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.119083 pixels
  Position = (356.8, 321.1) = 1 25 22.11 1 46 27.3
  Extent = 5.7 (3.4-7.8)", rotation angle = 0
  Source counts = 35.6 +/- 8.1
  Background counts = 29.5
  Rate = 0.006 +/- 0.001
[Fri Aug 10 09:37:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:21 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 09:37:21 2012] Source does appear to be extended
[Fri Aug 10 09:37:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 09:44:40 2012] XMMSAS src. selection expression = ellipse(30992.605740, 27889.660400, 339.618610, 339.618610, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing source region out to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src7_src.reg
[Fri Aug 10 09:44:40 2012] Extracting stamp from image fullrun_mos1_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (337, 302) - (376, 341)
[Fri Aug 10 09:44:40 2012] XMMSAS bgd. selection expression = annulus(30992.605740, 27889.660400, 566.031016, 1132.062033, X, Y) && !ellipse(28923.084000, 27150.150000, 2608.832075, 2608.832075, 0.000000, X, Y) && !ellipse(30262.968000, 27679.130800, 1304.416038, 1304.416038, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src7.gif
[Fri Aug 10 09:45:12 2012] Mean detx,y = (2228.40, 2689.44) 
[Fri Aug 10 09:45:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 09:45:21 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 09:45:21 2012] Setting source spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug 10 09:45:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Aug 10 09:53:50 2012] Not generating rmf since there are only 35 counts
[Fri Aug 10 09:53:50 2012] rmf not generated due to insufficient counts
[Fri Aug 10 10:05:41 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:41 2012] Error reading totcts from fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug 10 10:05:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:42 2012] Using photon index=1.80, rate=0.0061, arf fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src7.arf
[Fri Aug 10 10:05:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:42 2012] Updating source flux to 7.2e-14
[Fri Aug 10 10:05:45 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Fri Aug 10 10:05:45 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting