[Fri Aug 10 07:20:07 2012] Detection parameters:
  Position = (414.6, 320.4) = 1 25 5.33 1 46 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.1 +/- 12.4
  Background counts = 2.0
  Rate = 0.03 +/- 0.003

[Fri Aug 10 07:20:07 2012] Off-axis axis estimate = 8.57'
[Fri Aug 10 07:37:17 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 07:37:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 07:37:17 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Fri Aug 10 07:37:17 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.826
[Fri Aug 10 07:37:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.71"
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src2.csv
[Fri Aug 10 08:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 10 08:06:20 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 10 08:29:18 2012] Spatial fit model total counts = 126.417000, observed total counts = 121.000000
[Fri Aug 10 08:29:18 2012] Offset between fit and detection position for source 2 = 0.212612 pixels
[Fri Aug 10 08:29:18 2012] 125.804200 total counts/ 44.359000 bgd. counts: snr = 12.228540
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.212612 pixels
  Position = (414.4, 320.5) = 1 25 5.39 1 46 24.5
  Extent = 5.7 (4.8-7.0)", rotation angle = 0
  Source counts = 81.4 +/- 11.2
  Background counts = 44.4
  Rate = 0.01 +/- 0.002
[Fri Aug 10 08:29:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:18 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:29:18 2012] Source does appear to be extended
[Fri Aug 10 08:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:41:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:41:41 2012] Initial guess for spatial extent in simple fitting = 5.67"
[Fri Aug 10 08:41:41 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.693
[Fri Aug 10 08:41:41 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.67"
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug 10 09:12:09 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug 10 09:12:09 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug 10 09:37:21 2012] Spatial fit model total counts = 130.631000, observed total counts = 124.000000
[Fri Aug 10 09:37:21 2012] Offset between fit and detection position for source 2 = 0.041025 pixels
[Fri Aug 10 09:37:21 2012] 129.750800 total counts/ 43.089800 bgd. counts: snr = 13.201901
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.041025 pixels
  Position = (414.4, 320.5) = 1 25 5.39 1 46 24.7
  Extent = 7.6 (5.8-10.3)" x 4.6 (3.7-5.8)", rotation angle = 58 (40-83) degrees
  Source counts = 86.7 +/- 11.4
  Background counts = 43.1
  Rate = 0.01 +/- 0.002
[Fri Aug 10 09:37:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:21 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 09:37:21 2012] Source does appear to be extended
[Fri Aug 10 09:37:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri Aug 10 09:44:40 2012] XMMSAS src. selection expression = ellipse(36004.908000, 27837.199400, 458.803813, 277.803608, 57.989214, X, Y)
[Fri Aug 10 09:44:40 2012] Writing source region out to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug 10 09:44:40 2012] Extracting stamp from image fullrun_mos1_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (388, 294) - (441, 347)
[Fri Aug 10 09:44:40 2012] XMMSAS bgd. selection expression = annulus(36004.908000, 27837.199400, 764.673022, 1529.346044, X, Y) && !ellipse(37921.791000, 29113.344400, 448.342009, 448.342009, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src2.gif
[Fri Aug 10 09:44:52 2012] Mean detx,y = (3938.01, 7393.21) 
[Fri Aug 10 09:44:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 09:45:10 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 09:45:10 2012] Setting source spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 10 09:45:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug 10 09:53:46 2012] Not generating rmf since there are only 86 counts
[Fri Aug 10 09:53:46 2012] rmf not generated due to insufficient counts
[Fri Aug 10 10:05:41 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:41 2012] Error reading totcts from fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug 10 10:05:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:42 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src2.arf
[Fri Aug 10 10:05:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:42 2012] Updating source flux to 2.3e-13
[Fri Aug 10 10:05:45 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting