[Fri Aug 10 07:20:07 2012] Detection parameters:
  Position = (331.3, 299.2) = 1 25 29.52 1 44 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.3 +/- 8.7
  Background counts = 5.0
  Rate = 0.006 +/- 0.002

[Fri Aug 10 07:20:07 2012] Off-axis axis estimate = 2.38'
[Fri Aug 10 07:37:17 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 07:37:17 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Fri Aug 10 07:37:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Fri Aug 10 07:37:17 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.62"
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src8.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src8.csv
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src8.csv
[Fri Aug 10 08:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Aug 10 08:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:29:18 2012] Warning, spatial fit 8 centroid is now closest to src. 10
[Fri Aug 10 08:29:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:18 2012] Assessing source extent using major
[Fri Aug 10 08:29:18 2012] Source does appear to be extended
[Fri Aug 10 08:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:41:41 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:41:41 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Fri Aug 10 08:41:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.986
[Fri Aug 10 08:41:41 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.62"
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Aug 10 09:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src8.csv
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Aug 10 09:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src8.csv
[Fri Aug 10 09:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Aug 10 09:12:09 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Aug 10 09:37:21 2012] Warning, spatial fit 8 centroid is now closest to src. 10
[Fri Aug 10 09:37:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:21 2012] Assessing source extent using major
[Fri Aug 10 09:37:21 2012] Source does appear to be extended
[Fri Aug 10 09:37:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 09:37:21 2012] Source is confused with source 6
[Fri Aug 10 09:44:40 2012] XMMSAS src. selection expression = ellipse(28770.396027, 25984.452545, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing source region out to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 10 09:44:40 2012] Extracting stamp from image fullrun_mos1_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (294, 262) - (369, 337)
[Fri Aug 10 09:44:40 2012] XMMSAS bgd. selection expression = annulus(28770.396027, 25984.452545, 1087.500000, 2175.000000, X, Y) && !ellipse(28207.942600, 26762.943400, 892.888026, 892.888026, 0.000000, X, Y) && !ellipse(30992.605740, 27889.660400, 452.824813, 452.824813, 0.000000, X, Y) && !ellipse(27407.577454, 26496.437775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.557251, 27323.795349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.084000, 27150.150000, 2608.832075, 2608.832075, 0.000000, X, Y) && !ellipse(30262.968000, 27679.130800, 1304.416038, 1304.416038, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src12.gif
[Fri Aug 10 09:46:02 2012] Mean detx,y = (-193.79, 1102.91) 
[Fri Aug 10 09:46:03 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 09:46:11 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 09:46:11 2012] Setting source spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 10 09:46:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 10 09:54:12 2012] Not generating rmf since there are only 37 counts
[Fri Aug 10 09:54:12 2012] rmf not generated due to insufficient counts
[Fri Aug 10 10:05:41 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:41 2012] Error reading totcts from fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 10 10:05:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:42 2012] Using photon index=1.80, rate=0.00648, arf fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src12.arf
[Fri Aug 10 10:05:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:42 2012] Updating source flux to 6.2e-14
[Fri Aug 10 10:05:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting