[Fri Aug 10 07:20:07 2012] Detection parameters:
  Position = (324.9, 308.1) = 1 25 31.36 1 45 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 612.5 +/- 30.2
  Background counts = 5.3
  Rate = 0.1 +/- 0.005

[Fri Aug 10 07:20:07 2012] Off-axis axis estimate = 2.04'
[Fri Aug 10 07:37:17 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 07:37:17 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Fri Aug 10 07:37:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Fri Aug 10 07:37:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.45"
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 10 08:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src1.csv
[Fri Aug 10 08:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 10 08:06:20 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 10 08:06:20 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 10 08:29:18 2012] Spatial fit model total counts = 1002.740000, observed total counts = 998.000000
[Fri Aug 10 08:29:18 2012] Offset between fit and detection position for source 1 = 0.312713 pixels
[Fri Aug 10 08:29:18 2012] 1006.081000 total counts/ 411.854000 bgd. counts: snr = 29.280652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.312713 pixels
  Position = (324.7, 308.3) = 1 25 31.43 1 45 31.4
  Extent = 10.4 (9.5-11.8)", rotation angle = 0
  Source counts = 594.2 +/- 31.7
  Background counts = 411.9
  Rate = 0.1 +/- 0.005
[Fri Aug 10 08:29:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 08:29:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 08:29:18 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 08:29:18 2012] Source does appear to be extended
[Fri Aug 10 08:29:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 08:41:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 08:41:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 10 08:41:41 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Aug 10 08:41:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.083
[Fri Aug 10 08:41:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.36"
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 09:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 09:12:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 09:12:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 09:12:09 2012] fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 09:12:09 2012] Fit fullrun_mos1_xmm0109860201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug 10 09:37:21 2012] Spatial fit model total counts = 1122.790000, observed total counts = 1120.000000
[Fri Aug 10 09:37:21 2012] Offset between fit and detection position for source 1 = 0.150505 pixels
[Fri Aug 10 09:37:21 2012] 1126.499000 total counts/ 470.706000 bgd. counts: snr = 30.226782
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150505 pixels
  Position = (324.8, 308.2) = 1 25 31.39 1 45 31.0
  Extent = 11.2 (10.3-12.2)", rotation angle = 0
  Source counts = 655.8 +/- 33.6
  Background counts = 470.7
  Rate = 0.1 +/- 0.006
[Fri Aug 10 09:37:21 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 09:37:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 09:37:21 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 09:37:21 2012] Source does appear to be extended
[Fri Aug 10 09:37:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 09:37:21 2012] Source is confused with source 6
[Fri Aug 10 09:44:40 2012] XMMSAS src. selection expression = ellipse(28207.942600, 26762.943400, 669.666019, 669.666019, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing source region out to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 10 09:44:40 2012] Extracting stamp from image fullrun_mos1_xmm0109860201_pi300-10000_cl_sm2.00.img.gz, (286, 270) - (363, 347)
[Fri Aug 10 09:44:40 2012] XMMSAS bgd. selection expression = annulus(28207.942600, 26762.943400, 1116.110032, 2232.220064, X, Y) && !ellipse(27407.577454, 26496.437775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.557251, 27323.795349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.396027, 25984.452545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.084000, 27150.150000, 2608.832075, 2608.832075, 0.000000, X, Y) && !ellipse(30262.968000, 27679.130800, 1304.416038, 1304.416038, 0.000000, X, Y)
[Fri Aug 10 09:44:40 2012] Writing fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 10 09:44:41 2012] Mean detx,y = (191.24, 492.70) 
[Fri Aug 10 09:44:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 09:44:50 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 09:44:50 2012] Setting source spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 09:44:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 10 10:05:41 2012] Updating aperture counts using extracted products
[Fri Aug 10 10:05:41 2012] Error reading totcts from fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 10:05:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:05:42 2012] Using photon index=1.80, rate=0.112, arf fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 10 10:05:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:05:42 2012] Updating source flux to 1.1e-12
[Fri Aug 10 10:05:45 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Aug 10 10:06:25 2012] Reading fit data from xmm0109860201/analysis//spectral/fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Aug 10 10:06:25 2012] Spectral fit parameter nH value = 1.35309e+22
[Fri Aug 10 10:06:25 2012] Spectral fit parameter PhoIndex value = 10.0
[Fri Aug 10 10:06:25 2012] Failed to get F(0.3-8.0) from xmm0109860201/analysis//spectral/fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Aug 10 10:06:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 10:06:25 2012] Using Nh = 1.4e+22, photon index=10.00, rate=0.112, arf fullrun_mos1_xmm0109860201_pi300-10000_pass1_cl_src1.arf
[Fri Aug 10 10:06:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 10:06:27 2012] Updating source flux to 6.1e-13