[Thu Aug  2 10:42:22 2012] Detection parameters:
  Position = (372.2, 256.0) = 1 44 59.89 -4 36 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.1 +/- 22.3
  Background counts = 42.2
  Rate = 0.007 +/- 0.0006

[Thu Aug  2 10:42:22 2012] Off-axis axis estimate = 6.17'
[Thu Aug  2 11:58:17 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 11:58:17 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Thu Aug  2 11:58:17 2012] source mask rpix=2.2, npix_max = 28, mask sum = 35, frac = 1.212
[Thu Aug  2 11:58:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.51"
[Thu Aug  2 12:38:23 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass0_src2.ximg exists
[Thu Aug  2 12:38:23 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Aug  2 12:38:23 2012] Fit fullrun_mos1_xmm0109661201_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Aug  2 12:38:23 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Aug  2 12:38:23 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Aug  2 12:38:23 2012] Fit fullrun_mos1_xmm0109661201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Aug  2 13:16:27 2012] Spatial fit model total counts = 455.925000, observed total counts = 439.000000
[Thu Aug  2 13:16:27 2012] Offset between fit and detection position for source 17 = 0.450975 pixels
[Thu Aug  2 13:16:27 2012] 458.001000 total counts/ 231.001000 bgd. counts: snr = 14.935471
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.450975 pixels
  Position = (371.9, 256.4) = 1 44 59.98 -4 36 42.9
  Extent = 7.7 (6.8-8.9)", rotation angle = 0
  Source counts = 227.0 +/- 21.4
  Background counts = 231.0
  Rate = 0.004 +/- 0.0004
[Thu Aug  2 13:16:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 13:16:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 13:16:27 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 13:16:27 2012] Source does appear to be extended
[Thu Aug  2 13:16:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 14:11:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 14:11:05 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Aug  2 14:11:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.971
[Thu Aug  2 14:11:05 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.70"
[Thu Aug  2 14:53:12 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_src2.ximg exists
[Thu Aug  2 14:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_src2.csv
[Thu Aug  2 14:53:12 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Aug  2 14:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_src2.csv
[Thu Aug  2 14:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 14:53:14 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Aug  2 14:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Aug  2 14:53:14 2012] fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Aug  2 14:53:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Aug  2 14:53:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109661201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 15:33:34 2012] Warning, spatial fit 2 centroid is now closest to src. 28
[Thu Aug  2 15:33:34 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 15:33:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 15:33:34 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 15:33:34 2012] Source does appear to be extended
[Thu Aug  2 15:33:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 16:25:24 2012] XMMSAS src. selection expression = ellipse(32306.569240, 22254.974000, 461.811613, 461.811613, 0.000000, X, Y)
[Thu Aug  2 16:25:24 2012] Writing source region out to fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17_src.reg
[Thu Aug  2 16:25:24 2012] Extracting stamp from image fullrun_mos1_xmm0109661201_pi300-10000_cl_sm2.00.img.gz, (345, 230) - (398, 283)
[Thu Aug  2 16:25:24 2012] XMMSAS bgd. selection expression = annulus(32306.569240, 22254.974000, 769.686022, 1539.372044, X, Y) && !ellipse(32064.426623, 20333.150763, 617.666334, 349.280429, 96.796800, X, Y)
[Thu Aug  2 16:25:24 2012] Writing fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17.gif
[Thu Aug  2 16:25:49 2012] Mean detx,y = (-345.48, -8647.52) 
[Thu Aug  2 16:25:50 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 16:26:07 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 16:26:08 2012] Setting source spectrum file to fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Aug  2 16:26:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Aug  2 17:02:59 2012] Updating aperture counts using extracted products
[Thu Aug  2 17:02:59 2012] Error reading totcts from fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Aug  2 17:03:00 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 17:03:00 2012] Using photon index=1.80, rate=0.004, arf fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17.arf
[Thu Aug  2 17:03:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 17:03:00 2012] Updating source flux to 7.4e-14
[Thu Aug  2 17:03:23 2012] Reading fit data from xmm0109661201/analysis//spectral/fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17_pl.csv
[Thu Aug  2 17:03:23 2012] Spectral fit parameter nH value = 2.15358e+14
[Thu Aug  2 17:03:23 2012] Spectral fit parameter PhoIndex value = 2.03124
[Thu Aug  2 17:03:23 2012] Failed to get F(0.3-8.0) from xmm0109661201/analysis//spectral/fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 17:03:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 17:03:23 2012] Using Nh = 2.2e+14, photon index=2.03, rate=0.004, arf fullrun_mos1_xmm0109661201_pi300-10000_pass1_cl_src17.arf
[Thu Aug  2 17:03:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 17:03:23 2012] Updating source flux to 6.6e-14