[Mon Aug 13 21:35:58 2012] Detection parameters:
  Position = (375.8, 321.2) = 13 34 8.68 37 54 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.4 +/- 22.7
  Background counts = 107.3
  Rate = 0.004 +/- 0.0004

[Mon Aug 13 21:35:59 2012] Off-axis axis estimate = 5.85'
[Mon Aug 13 21:42:30 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 21:42:30 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Aug 13 21:42:30 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.890
[Mon Aug 13 21:42:30 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 9.35"
[Tue Aug 14 00:05:25 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src51.ximg exists
[Tue Aug 14 00:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src51.csv
[Tue Aug 14 00:05:25 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src51_1.ximg exists
[Tue Aug 14 00:05:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src51.csv
[Tue Aug 14 00:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 00:05:26 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Tue Aug 14 00:05:26 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Tue Aug 14 00:05:26 2012] Fit fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Tue Aug 14 02:00:33 2012] Spatial fit model total counts = 924.847000, observed total counts = 849.000000
[Tue Aug 14 02:00:33 2012] Offset between fit and detection position for source 54 = 0.186570 pixels
[Tue Aug 14 02:00:33 2012] 907.098000 total counts/ 796.660000 bgd. counts: snr = 3.912749
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.186570 pixels
  Position = (375.8, 321.3) = 13 34 8.71 37 54 41.3
  Extent = 4.5 (3.7-6.2)", rotation angle = 0
  Source counts = 110.4 +/- 30.1
  Background counts = 796.7
  Rate = 0.002 +/- 0.0004
[Tue Aug 14 02:00:33 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:33 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 02:00:33 2012] Source does appear to be extended
[Tue Aug 14 02:00:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 02:01:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 02:01:02 2012] Initial guess for spatial extent in simple fitting = 4.54"
[Tue Aug 14 02:01:02 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.943
[Tue Aug 14 02:01:02 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 4.54"
[Tue Aug 14 03:45:54 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src49.ximg exists
[Tue Aug 14 03:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src49.csv
[Tue Aug 14 03:45:54 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src49_1.ximg exists
[Tue Aug 14 03:45:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src49.csv
[Tue Aug 14 03:45:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 03:45:55 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Tue Aug 14 03:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src49.csv
[Tue Aug 14 03:45:55 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Tue Aug 14 03:45:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src49.csv
[Tue Aug 14 03:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:28:45 2012] Warning, spatial fit 49 centroid is now closest to src. 61
[Tue Aug 14 05:28:45 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:45 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 05:28:45 2012] Source does appear to be extended
[Tue Aug 14 05:28:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 05:29:15 2012] XMMSAS src. selection expression = ellipse(32641.985200, 27907.786400, 272.637008, 272.637008, 0.000000, X, Y)
[Tue Aug 14 05:29:15 2012] Writing source region out to fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src54_src.reg
[Tue Aug 14 05:29:15 2012] Extracting stamp from image fullrun_pn_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (360, 306) - (391, 337)
[Tue Aug 14 05:29:15 2012] XMMSAS bgd. selection expression = annulus(32641.985200, 27907.786400, 454.395013, 908.790026, X, Y)
[Tue Aug 14 05:29:15 2012] Writing fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src54.gif
[Tue Aug 14 06:25:26 2012] Mean detx,y = (5660.03, 3464.21) 
[Tue Aug 14 06:25:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 06:25:41 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 06:25:42 2012] Setting source spectrum file to fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Aug 14 06:25:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Aug 14 10:20:10 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:10 2012] Error reading totcts from fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Aug 14 10:20:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:15 2012] Using photon index=1.80, rate=0.00165, arf fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src54.arf
[Tue Aug 14 10:20:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:15 2012] Updating source flux to 6.6e-15