[Mon Aug 13 21:35:56 2012] Detection parameters:
  Position = (259.1, 205.9) = 13 34 51.54 37 46 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21456.2 +/- 174.2
  Background counts = 106.7
  Rate = 0.3 +/- 0.002

[Mon Aug 13 21:35:59 2012] Off-axis axis estimate = 7.29'
[Mon Aug 13 21:42:30 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 21:42:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 21:42:30 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Mon Aug 13 21:42:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Mon Aug 13 21:42:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.07"
[Tue Aug 14 00:05:24 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 00:05:24 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 00:05:24 2012] Fit fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Aug 14 00:05:25 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 00:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 14 00:05:25 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 00:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Aug 14 00:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 02:00:33 2012] Spatial fit model total counts = 18554.800000, observed total counts = 19716.000000
[Tue Aug 14 02:00:33 2012] Offset between fit and detection position for source 1 = 0.404881 pixels
[Tue Aug 14 02:00:33 2012] 19474.300000 total counts/ 18537.200000 bgd. counts: snr = 6.882780
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.404881 pixels
  Position = (259.5, 205.6) = 13 34 51.43 37 46 18.1
  Extent = 5.5" x 5.5", rotation angle = 54
  Source counts = 937.1 +/- 139.6
  Background counts = 18537.2
  Rate = 0.01 +/- 0.002
[Tue Aug 14 02:00:33 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:33 2012] Assessing source extent using major
[Tue Aug 14 02:00:33 2012] Source does appear to be extended
[Tue Aug 14 02:00:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 02:01:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 02:01:02 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Tue Aug 14 02:01:02 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.715
[Tue Aug 14 02:01:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.54"
[Tue Aug 14 03:45:53 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 03:45:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 03:45:53 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 03:45:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 03:45:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 03:45:54 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 03:45:54 2012] fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 03:45:54 2012] Fit fullrun_pn_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 14 05:28:45 2012] Spatial fit model total counts = 19635.300000, observed total counts = 19068.000000
[Tue Aug 14 05:28:45 2012] Offset between fit and detection position for source 1 = 0.307997 pixels
[Tue Aug 14 05:28:45 2012] 19920.500000 total counts/ 5332.200000 bgd. counts: snr = 199.779752
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.307997 pixels
  Position = (259.2, 205.8) = 13 34 51.52 37 46 18.9
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 14588.3 +/- 141.1
  Background counts = 5332.2
  Rate = 0.2 +/- 0.002
[Tue Aug 14 05:28:45 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:45 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 05:28:45 2012] Source does appear to be extended
[Tue Aug 14 05:28:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 05:29:14 2012] Counts = 14588.300000, rescaling region sizes by 3.000000
[Tue Aug 14 05:29:14 2012] XMMSAS src. selection expression = ellipse(22502.699480, 17855.819360, 1122.048626, 1122.048626, 0.000000, X, Y)
[Tue Aug 14 05:29:14 2012] Writing source region out to fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 05:29:14 2012] Extracting stamp from image fullrun_pn_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (195, 141) - (324, 270)
[Tue Aug 14 05:29:14 2012] XMMSAS bgd. selection expression = annulus(22502.699480, 17855.819360, 5610.243131, 11220.486263, X, Y) && !ellipse(25662.872742, 29589.918610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.264424, 20494.816800, 448.859213, 448.859213, 0.000000, X, Y) && !ellipse(16707.016861, 25463.349945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23564.370200, 19644.796200, 410.513612, 410.513612, 0.000000, X, Y) && !ellipse(34092.699615, 23932.194550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19000.581514, 22105.689475, 466.152711, 444.750960, 67.204166, X, Y) && !ellipse(19809.435600, 22212.168800, 523.508815, 388.872811, 68.828000, X, Y) && !ellipse(28853.708191, 17777.385284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.582977, 11979.360184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23728.429016, 28015.714569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32641.985200, 27907.786400, 363.516010, 363.516010, 0.000000, X, Y) && !ellipse(26201.896200, 27442.395600, 384.269611, 384.269611, 0.000000, X, Y) && !ellipse(16416.053528, 27361.711823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30028.269257, 27066.995605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19603.927292, 15299.244659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33954.667380, 26316.367200, 344.649610, 344.649610, 0.000000, X, Y) && !ellipse(17418.046982, 15488.556213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.939270, 25068.024048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31176.186420, 24075.853600, 379.025611, 379.025611, 0.000000, X, Y) && !ellipse(19181.285126, 22891.369965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30141.511446, 22866.804400, 352.508010, 352.508010, 0.000000, X, Y) && !ellipse(20669.716400, 22609.770200, 328.526409, 328.526409, 0.000000, X, Y) && !ellipse(28212.505000, 22435.770200, 328.526409, 328.526409, 0.000000, X, Y) && !ellipse(27249.945709, 22191.646286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17037.261353, 21341.201904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15030.809250, 21274.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32023.281800, 19827.837000, 412.211212, 412.211212, 0.000000, X, Y) && !ellipse(25334.156219, 10736.806473, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 05:29:14 2012] Writing fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 05:30:00 2012] Mean detx,y = (-8309.17, 6370.81) 
[Tue Aug 14 05:30:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 05:34:08 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 05:34:08 2012] Setting source spectrum file to fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 05:34:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 10:20:07 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:07 2012] Error reading totcts from fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 10:20:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:12 2012] Using photon index=1.80, rate=0.218, arf fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 10:20:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:12 2012] Updating source flux to 9.9e-13
[Tue Aug 14 10:30:44 2012] Reading fit data from xmm0109661001/analysis//spectral/fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 10:30:44 2012] Spectral fit parameter nH value = 3.69553e+21
[Tue Aug 14 10:30:44 2012] Spectral fit parameter PhoIndex value = 4.95804
[Tue Aug 14 10:30:44 2012] Failed to get F(0.3-8.0) from xmm0109661001/analysis//spectral/fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 10:30:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:30:44 2012] Using Nh = 3.7e+21, photon index=4.96, rate=0.218, arf fullrun_pn_xmm0109661001_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 10:30:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:30:44 2012] Updating source flux to 5.8e-13