[Mon Aug 13 21:37:10 2012] Detection parameters:
  Position = (257.6, 373.7) = 13 34 52.14 37 58 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.3 +/- 19.9
  Background counts = 66.1
  Rate = 0.003 +/- 0.0004

[Mon Aug 13 21:37:11 2012] Off-axis axis estimate = 6.21'
[Tue Aug 14 00:56:01 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:56:01 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Tue Aug 14 00:56:01 2012] source mask rpix=2.2, npix_max = 28, mask sum = 17, frac = 0.587
[Tue Aug 14 00:56:01 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.53"
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src18.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src18.csv
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src18.csv
[Tue Aug 14 02:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Aug 14 02:00:18 2012] Fit fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Aug 14 02:00:47 2012] Spatial fit model total counts = 313.124000, observed total counts = 288.000000
[Tue Aug 14 02:00:47 2012] Offset between fit and detection position for source 27 = 1.201103 pixels
[Tue Aug 14 02:00:47 2012] 309.397900 total counts/ 225.066000 bgd. counts: snr = 5.621302
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.201103 pixels
  Position = (257.8, 372.5) = 13 34 52.08 37 58 24.1
  Extent = 6.2 (4.5-7.9)", rotation angle = 0
  Source counts = 84.3 +/- 17.6
  Background counts = 225.1
  Rate = 0.001 +/- 0.0002
[Tue Aug 14 02:00:47 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:47 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 02:00:47 2012] Source does appear to be extended
[Tue Aug 14 02:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 04:30:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:46 2012] Initial guess for spatial extent in simple fitting = 6.20"
[Tue Aug 14 04:30:46 2012] source mask rpix=1.4, npix_max = 14, mask sum = 6, frac = 0.404
[Tue Aug 14 04:30:46 2012] Skipping simple spatial due to low active detector fraction
[Tue Aug 14 05:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:58 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 05:28:58 2012] Source does appear to be extended
[Tue Aug 14 05:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 09:02:44 2012] XMMSAS src. selection expression = ellipse(22380.674020, 32359.846000, 372.129611, 372.129611, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing source region out to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src27_src.reg
[Tue Aug 14 09:02:44 2012] Extracting stamp from image fullrun_mos2_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (236, 351) - (279, 394)
[Tue Aug 14 09:02:44 2012] XMMSAS bgd. selection expression = annulus(22380.674020, 32359.846000, 620.216018, 1240.432036, X, Y) && !ellipse(22343.394000, 31569.129600, 317.756809, 317.756809, 0.000000, X, Y) && !ellipse(23922.688184, 31124.767529, 442.988431, 176.744183, 5.385981, X, Y)
[Tue Aug 14 09:02:44 2012] Writing fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src27.gif
[Tue Aug 14 09:07:55 2012] Mean detx,y = (718.15, 5713.75) 
[Tue Aug 14 09:07:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 09:08:16 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 09:08:16 2012] Setting source spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Aug 14 09:08:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Aug 14 09:51:43 2012] Not generating rmf since there are only 84 counts
[Tue Aug 14 09:51:43 2012] rmf not generated due to insufficient counts
[Tue Aug 14 10:20:21 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:21 2012] Error reading totcts from fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Aug 14 10:20:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:24 2012] Using photon index=1.80, rate=0.00113, arf fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src27.arf
[Tue Aug 14 10:20:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:24 2012] Updating source flux to 1.8e-14
[Tue Aug 14 10:22:56 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting