[Mon Aug 13 21:37:10 2012] Detection parameters:
  Position = (314.3, 234.9) = 13 34 31.32 37 48 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.2 +/- 23.6
  Background counts = 75.0
  Rate = 0.004 +/- 0.0003

[Mon Aug 13 21:37:11 2012] Off-axis axis estimate = 4.75'
[Tue Aug 14 00:56:01 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:56:01 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Tue Aug 14 00:56:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.825
[Tue Aug 14 00:56:01 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.80"
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src12.ximg exists
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Aug 14 02:00:18 2012] Fit fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src12 appears to have run properly
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src12.csv
[Tue Aug 14 02:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 02:00:47 2012] Source 20 is offset by 8.353243 and 1.074912 pixels which is larger than
2 X fitted extent = 1.011646 x 1.011646, not incorporating fit results
[Tue Aug 14 02:00:47 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:47 2012] Assessing source extent using major
[Tue Aug 14 02:00:47 2012] Source does appear to be extended
[Tue Aug 14 02:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 04:30:46 2012] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:46 2012] Initial guess for spatial extent in simple fitting = 8.80"
[Tue Aug 14 04:30:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.825
[Tue Aug 14 04:30:46 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.80"
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src11.ximg exists
[Tue Aug 14 05:28:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src11.csv
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Aug 14 05:28:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src11.csv
[Tue Aug 14 05:28:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Aug 14 05:28:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Aug 14 05:28:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Aug 14 05:28:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:28:58 2012] Spatial fit model total counts = 1260.870000, observed total counts = 477.000000
[Tue Aug 14 05:28:58 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 05:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:58 2012] Assessing source extent using major
[Tue Aug 14 05:28:58 2012] Source does appear to be extended
[Tue Aug 14 05:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 09:02:44 2012] XMMSAS src. selection expression = ellipse(27292.126160, 20389.777466, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing source region out to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src20_src.reg
[Tue Aug 14 09:02:44 2012] Extracting stamp from image fullrun_mos2_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (277, 197) - (352, 272)
[Tue Aug 14 09:02:44 2012] XMMSAS bgd. selection expression = annulus(27292.126160, 20389.777466, 1087.500000, 2175.000000, X, Y) && !ellipse(28893.067766, 17778.195968, 447.392219, 368.141673, 0.000000, X, Y) && !ellipse(27298.782318, 22152.074402, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src20.gif
[Tue Aug 14 09:06:06 2012] Mean detx,y = (2948.31, -7040.50) 
[Tue Aug 14 09:06:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 09:06:18 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 09:06:18 2012] Setting source spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Aug 14 09:06:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Aug 14 09:39:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 14 09:39:39 2012] rmf not generated due to insufficient counts
[Tue Aug 14 10:20:21 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:21 2012] Error reading totcts from fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Aug 14 10:20:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:24 2012] Using photon index=1.80, rate=0.00388, arf fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src20.arf
[Tue Aug 14 10:20:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:24 2012] Updating source flux to 6.3e-14
[Tue Aug 14 10:22:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting