[Mon Aug 13 21:37:10 2012] Detection parameters:
  Position = (120.0, 336.0) = 13 35 42.72 37 55 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.6 +/- 15.3
  Background counts = 50.8
  Rate = 0.001 +/- 0.0002

[Mon Aug 13 21:37:11 2012] Off-axis axis estimate = 13.22'
[Tue Aug 14 00:56:01 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:56:01 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Tue Aug 14 00:56:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Tue Aug 14 00:56:01 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 13.04"
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src44.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src44.csv
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src44.csv
[Tue Aug 14 02:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 02:00:19 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue Aug 14 02:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue Aug 14 02:00:19 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Aug 14 02:00:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src44.csv
[Tue Aug 14 02:00:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 02:00:47 2012] Warning, spatial fit 44 centroid is now closest to src. 35
[Tue Aug 14 02:00:47 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:47 2012] Assessing source extent using major
[Tue Aug 14 02:00:47 2012] Source does appear to be extended
[Tue Aug 14 02:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 04:30:46 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:46 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Tue Aug 14 04:30:46 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Tue Aug 14 04:30:46 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 13.04"
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src42.ximg exists
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src42_1.ximg exists
[Tue Aug 14 05:28:30 2012] Fit fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src42 appears to have run properly
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Tue Aug 14 05:28:30 2012] Fit fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Tue Aug 14 05:28:58 2012] Spatial fit model total counts = 291.653000, observed total counts = 265.000000
[Tue Aug 14 05:28:58 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 14 05:28:58 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.834693 pixels away
[Tue Aug 14 05:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:58 2012] Assessing source extent using major
[Tue Aug 14 05:28:58 2012] Source does appear to be extended
[Tue Aug 14 05:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 09:02:44 2012] XMMSAS src. selection expression = ellipse(10394.285789, 29180.762665, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing source region out to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src13_src.reg
[Tue Aug 14 09:02:44 2012] Extracting stamp from image fullrun_mos2_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (83, 298) - (158, 373)
[Tue Aug 14 09:02:44 2012] XMMSAS bgd. selection expression = annulus(10394.285789, 29180.762665, 1087.500000, 2175.000000, X, Y) && !ellipse(12073.785000, 31604.968600, 389.640811, 389.640811, 0.000000, X, Y) && !ellipse(11159.346200, 29824.271000, 397.013611, 397.013611, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src13.gif
[Tue Aug 14 09:15:37 2012] Mean detx,y = (12494.79, 9427.49) 
[Tue Aug 14 09:15:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 09:15:55 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 09:15:55 2012] Setting source spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Aug 14 09:15:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Aug 14 10:17:07 2012] Not generating rmf since there are only 86 counts
[Tue Aug 14 10:17:07 2012] rmf not generated due to insufficient counts
[Tue Aug 14 10:20:23 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:23 2012] Error reading totcts from fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Aug 14 10:20:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:25 2012] Using photon index=1.80, rate=0.00101, arf fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src13.arf
[Tue Aug 14 10:20:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:25 2012] Updating source flux to 3.3e-14
[Tue Aug 14 10:22:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting