[Mon Aug 13 21:37:09 2012] Detection parameters:
  Position = (259.5, 206.4) = 13 34 51.42 37 46 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5061.6 +/- 88.6
  Background counts = 57.3
  Rate = 0.06 +/- 0.001

[Mon Aug 13 21:37:11 2012] Off-axis axis estimate = 7.25'
[Tue Aug 14 00:56:01 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:56:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 00:56:01 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Tue Aug 14 00:56:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.633
[Tue Aug 14 00:56:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.05"
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 02:00:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 02:00:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 02:00:18 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 02:00:18 2012] Fit fullrun_mos2_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 14 02:00:47 2012] Spatial fit model total counts = 5318.280000, observed total counts = 4838.000000
[Tue Aug 14 02:00:47 2012] Offset between fit and detection position for source 1 = 0.731548 pixels
[Tue Aug 14 02:00:47 2012] 5305.840000 total counts/ 1198.150000 bgd. counts: snr = 118.670307
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.731548 pixels
  Position = (259.4, 205.7) = 13 34 51.46 37 46 18.3
  Extent = 7.5 (7.2-7.7)", rotation angle = 0
  Source counts = 4107.7 +/- 72.8
  Background counts = 1198.2
  Rate = 0.05 +/- 0.001
[Tue Aug 14 02:00:47 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:47 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 02:00:47 2012] Source does appear to be extended
[Tue Aug 14 02:00:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 04:30:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 04:30:46 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Tue Aug 14 04:30:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.866
[Tue Aug 14 04:30:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.46"
[Tue Aug 14 05:28:29 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 05:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 05:28:29 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 05:28:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 05:28:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 05:28:30 2012] fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 05:28:30 2012] Fit fullrun_mos2_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 14 05:28:58 2012] Spatial fit model total counts = 5115.570000, observed total counts = 4668.000000
[Tue Aug 14 05:28:58 2012] Offset between fit and detection position for source 1 = 0.023549 pixels
[Tue Aug 14 05:28:58 2012] 5118.310000 total counts/ 1116.610000 bgd. counts: snr = 119.755032
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023549 pixels
  Position = (259.4, 205.7) = 13 34 51.45 37 46 18.3
  Extent = 7.3 (7.0-7.5)", rotation angle = 0
  Source counts = 4001.7 +/- 71.5
  Background counts = 1116.6
  Rate = 0.05 +/- 0.001
[Tue Aug 14 05:28:58 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:58 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 05:28:58 2012] Source does appear to be extended
[Tue Aug 14 05:28:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 09:02:44 2012] Counts = 4001.700000, rescaling region sizes by 2.000000
[Tue Aug 14 09:02:44 2012] XMMSAS src. selection expression = ellipse(22519.717200, 17844.526800, 871.405225, 871.405225, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing source region out to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 09:02:44 2012] Extracting stamp from image fullrun_mos2_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (209, 156) - (309, 256)
[Tue Aug 14 09:02:44 2012] XMMSAS bgd. selection expression = annulus(22519.717200, 17844.526800, 2904.684084, 5809.368167, X, Y) && !ellipse(27292.126160, 20389.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19806.178100, 22217.918600, 507.124015, 507.124015, 0.000000, X, Y) && !ellipse(19015.243720, 22123.015200, 401.575212, 401.575212, 0.000000, X, Y) && !ellipse(27298.782318, 22152.074402, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 09:02:44 2012] Writing fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 09:02:49 2012] Mean detx,y = (8388.46, -6578.58) 
[Tue Aug 14 09:02:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 09:03:28 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 09:03:28 2012] Setting source spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 09:03:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 10:20:20 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:21 2012] Error reading totcts from fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 10:20:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:23 2012] Using photon index=1.80, rate=0.0534, arf fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 10:20:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:23 2012] Updating source flux to 1.1e-12
[Tue Aug 14 10:26:33 2012] Reading fit data from xmm0109661001/analysis//spectral/fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 10:26:33 2012] Spectral fit parameter nH value = 3.0109e+21
[Tue Aug 14 10:26:33 2012] Spectral fit parameter PhoIndex value = 4.34277
[Tue Aug 14 10:26:33 2012] Failed to get F(0.3-8.0) from xmm0109661001/analysis//spectral/fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 10:26:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:26:33 2012] Using Nh = 3e+21, photon index=4.34, rate=0.0534, arf fullrun_mos2_xmm0109661001_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 10:26:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:26:33 2012] Updating source flux to 7.3e-13