[Mon Aug 13 21:36:33 2012] Detection parameters:
  Position = (259.1, 205.9) = 13 34 51.55 37 46 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6694.8 +/- 97.6
  Background counts = 61.8
  Rate = 0.2 +/- 0.002

[Mon Aug 13 21:36:34 2012] Off-axis axis estimate = 7.29'
[Tue Aug 14 00:05:27 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 00:05:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 14 00:05:27 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Tue Aug 14 00:05:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135
[Tue Aug 14 00:05:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.07"
[Tue Aug 14 00:56:00 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 00:56:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 00:56:00 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 00:56:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 00:56:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 00:56:00 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 00:56:00 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 00:56:00 2012] Fit fullrun_mos1_xmm0109661001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 14 02:00:39 2012] Spatial fit model total counts = 6289.000000, observed total counts = 6289.000000
[Tue Aug 14 02:00:39 2012] Offset between fit and detection position for source 7 = 0.162431 pixels
[Tue Aug 14 02:00:39 2012] 6314.370000 total counts/ 1284.730000 bgd. counts: snr = 140.323681
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.162431 pixels
  Position = (259.3, 205.8) = 13 34 51.50 37 46 18.8
  Extent = 7.2 (7.1-7.4)", rotation angle = 0
  Source counts = 5029.6 +/- 79.5
  Background counts = 1284.7
  Rate = 0.07 +/- 0.001
[Tue Aug 14 02:00:39 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 02:00:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 02:00:39 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 02:00:39 2012] Source does appear to be extended
[Tue Aug 14 02:00:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 02:00:39 2012] Source is confused with source 14
[Tue Aug 14 03:45:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 03:45:55 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Aug 14 03:45:55 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Tue Aug 14 03:45:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.24"
[Tue Aug 14 04:30:45 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 04:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 04:30:45 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 04:30:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 04:30:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 04:30:46 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 04:30:46 2012] fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 04:30:46 2012] Fit fullrun_mos1_xmm0109661001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 14 05:28:50 2012] Spatial fit model total counts = 6042.990000, observed total counts = 6043.000000
[Tue Aug 14 05:28:50 2012] Offset between fit and detection position for source 7 = 0.002586 pixels
[Tue Aug 14 05:28:50 2012] 6054.920000 total counts/ 1135.560000 bgd. counts: snr = 145.983430
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.002586 pixels
  Position = (259.3, 205.8) = 13 34 51.49 37 46 18.8
  Extent = 7.0 (6.9-7.2)", rotation angle = 0
  Source counts = 4919.4 +/- 77.8
  Background counts = 1135.6
  Rate = 0.07 +/- 0.001
[Tue Aug 14 05:28:51 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 05:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 05:28:51 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 05:28:51 2012] Source does appear to be extended
[Tue Aug 14 05:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 08:09:42 2012] Counts = 4919.360000, rescaling region sizes by 2.000000
[Tue Aug 14 08:09:42 2012] XMMSAS src. selection expression = ellipse(22509.124600, 17854.915200, 845.696424, 845.696424, 0.000000, X, Y)
[Tue Aug 14 08:09:42 2012] Writing source region out to fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7_src.reg
[Tue Aug 14 08:09:42 2012] Extracting stamp from image fullrun_mos1_xmm0109661001_pi300-10000_cl_sm2.00.img.gz, (211, 157) - (308, 254)
[Tue Aug 14 08:09:42 2012] XMMSAS bgd. selection expression = annulus(22509.124600, 17854.915200, 2818.988081, 5637.976162, X, Y) && !ellipse(27308.813019, 20222.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19799.754780, 22208.899000, 607.211217, 387.928811, 52.535000, X, Y) && !ellipse(19004.951084, 22130.431200, 410.861612, 410.861612, 0.000000, X, Y) && !ellipse(28964.499908, 17729.367752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23875.475159, 19235.684021, 3480.000000, 3480.000000, 0.000000, X, Y)
[Tue Aug 14 08:09:42 2012] Writing fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7.gif
[Tue Aug 14 08:09:47 2012] Mean detx,y = (-6343.98, -8581.98) 
[Tue Aug 14 08:09:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 08:10:31 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 08:10:32 2012] Setting source spectrum file to fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Aug 14 08:10:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Aug 14 10:20:16 2012] Updating aperture counts using extracted products
[Tue Aug 14 10:20:16 2012] Error reading totcts from fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Aug 14 10:20:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:20:19 2012] Using photon index=1.80, rate=0.0655, arf fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7.arf
[Tue Aug 14 10:20:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:20:19 2012] Updating source flux to 1.2e-12
[Tue Aug 14 10:20:29 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Tue Aug 14 10:22:56 2012] Reading fit data from xmm0109661001/analysis//spectral/fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7_pl.csv
[Tue Aug 14 10:22:56 2012] Spectral fit parameter nH value = 3.25054e+21
[Tue Aug 14 10:22:56 2012] Spectral fit parameter PhoIndex value = 4.613
[Tue Aug 14 10:22:56 2012] Failed to get F(0.3-8.0) from xmm0109661001/analysis//spectral/fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 10:22:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 10:22:56 2012] Using Nh = 3.3e+21, photon index=4.61, rate=0.0655, arf fullrun_mos1_xmm0109661001_pi300-10000_pass1_cl_src7.arf
[Tue Aug 14 10:22:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 10:22:56 2012] Updating source flux to 7.3e-13