[Wed Jun 19 09:18:09 2013] Detection parameters:
  Position = (410.7, 298.0) = 13 33 55.91 37 52 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.6 +/- 19.1
  Background counts = 87.2
  Rate = 0.006 +/- 0.0008

[Wed Jun 19 09:18:10 2013] Off-axis axis estimate = 8.14'
[Wed Jun 19 09:21:50 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 09:21:50 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Wed Jun 19 09:21:50 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Wed Jun 19 09:21:50 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.50"
[Wed Jun 19 10:00:06 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jun 19 10:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_src15.csv
[Wed Jun 19 10:00:06 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jun 19 10:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_src15.csv
[Wed Jun 19 10:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:00:07 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jun 19 10:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 19 10:00:07 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jun 19 10:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 19 10:00:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:42:01 2013] Warning, spatial fit 15 centroid is now closest to src. 15
[Wed Jun 19 10:42:01 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:42:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:42:01 2013] Assessing source extent using major
[Wed Jun 19 10:42:01 2013] Source does appear to be extended
[Wed Jun 19 10:42:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 10:42:14 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:42:14 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Wed Jun 19 10:42:14 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Wed Jun 19 10:42:14 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.50"
[Wed Jun 19 11:18:25 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 19 11:18:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_src15.csv
[Wed Jun 19 11:18:25 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 19 11:18:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_src15.csv
[Wed Jun 19 11:18:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:18:25 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 19 11:18:25 2013] fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 19 11:18:25 2013] Fit fullrun_pn_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jun 19 11:59:09 2013] Spatial fit model total counts = 307.514000, observed total counts = 282.000000
[Wed Jun 19 11:59:09 2013] Offset between fit and detection position for source 17 = 0.294082 pixels
[Wed Jun 19 11:59:09 2013] 306.006000 total counts/ 253.128000 bgd. counts: snr = 3.323571
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.294082 pixels
  Position = (410.7, 297.7) = 13 33 55.92 37 52 57.8
  Extent = 3.7 (2.8-5.0)", rotation angle = 0
  Source counts = 52.9 +/- 17.5
  Background counts = 253.1
  Rate = 0.004 +/- 0.001
[Wed Jun 19 11:59:09 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 11:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 11:59:09 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 11:59:09 2013] Source does appear to be extended
[Wed Jun 19 11:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:59:22 2013] XMMSAS src. selection expression = ellipse(35682.903080, 25847.762200, 221.356206, 221.356206, 0.000000, X, Y)
[Wed Jun 19 11:59:22 2013] Writing source region out to fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 19 11:59:22 2013] Extracting stamp from image fullrun_pn_xmm0109660901_pi300-10000_cl_sm2.00.img.gz, (398, 285) - (423, 310)
[Wed Jun 19 11:59:22 2013] XMMSAS bgd. selection expression = annulus(35682.903080, 25847.762200, 368.927011, 737.854021, X, Y) && !ellipse(34460.222046, 27176.895233, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 11:59:22 2013] Writing fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17.gif
[Wed Jun 19 12:07:24 2013] Mean detx,y = (7106.51, 6847.31) 
[Wed Jun 19 12:07:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 12:07:38 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 12:07:39 2013] Setting source spectrum file to fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 19 12:07:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 19 12:29:00 2013] Not generating rmf since there are only 52 counts
[Wed Jun 19 12:29:00 2013] rmf not generated due to insufficient counts
[Wed Jun 19 13:00:38 2013] Updating aperture counts using extracted products
[Wed Jun 19 13:00:38 2013] Total counts from fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 71.00
[Wed Jun 19 13:00:38 2013] Total counts from fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17_bgd.pi.gz = 94.00
[Wed Jun 19 13:00:38 2013] Got source and background scale factors 153600.000000, 1068256.000000
[Wed Jun 19 13:00:38 2013] User source parameters:
  Position = (410.7, 297.7) = 13 33 55.92 37 52 57.8
  Extent = 3.7 (2.8-5.0)", rotation angle = 0
  Source aperture counts = 57.5 +/- 9.5
  Background aperture counts = 13.5
  Rate = 0.004 +/- 0.0007

[Wed Jun 19 13:00:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 13:00:41 2013] Using photon index=1.80, rate=0.00392, arf fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17.arf
[Wed Jun 19 13:00:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 13:00:41 2013] Updating source flux to 2.8e-14
[Wed Jun 19 13:00:50 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 13:00:53 2013] xmm0109660901/analysis//spectral/fullrun_pn_xmm0109660901_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete