[Wed Jun 19 09:18:52 2013] Detection parameters:
  Position = (178.3, 174.8) = 13 35 21.22 37 44 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.4 +/- 18.6
  Background counts = 98.8
  Rate = 0.002 +/- 0.0004

[Wed Jun 19 09:18:52 2013] Off-axis axis estimate = 12.50'
[Wed Jun 19 10:18:16 2013] Using EEF radius (= 12.68 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:18:16 2013] Initial guess for spatial extent in simple fitting = 12.68"
[Wed Jun 19 10:18:16 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.051
[Wed Jun 19 10:18:16 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 12.68"
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jun 19 10:41:56 2013] Fit fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src17 appears to have run properly
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jun 19 10:41:56 2013] Fit fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Jun 19 10:42:04 2013] Warning, spatial fit 13 centroid is now closest to src. 3
[Wed Jun 19 10:42:06 2013] Spatial fit model total counts = 70.509900, observed total counts = 69.000000
[Wed Jun 19 10:42:06 2013] Offset between fit and detection position for source 17 = 6.906906 pixels
[Wed Jun 19 10:42:06 2013] 74.766900 total counts/ 19.906000 bgd. counts: snr = 12.296200
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 6.906906 pixels
  Position = (181.3, 168.6) = 13 35 20.12 37 43 36.3
  Extent = 21.8 (14.7-25.4)", rotation angle = 0
  Source counts = 54.9 +/- 8.6
  Background counts = 19.9
  Rate = 0.003 +/- 0.0004
[Wed Jun 19 10:42:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:42:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 10:42:06 2013] Source does appear to be extended
[Wed Jun 19 10:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:36:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:36:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 11:36:10 2013] Initial guess for spatial extent in simple fitting = 21.81"
[Wed Jun 19 11:36:10 2013] source mask rpix=5.0, npix_max = 121, mask sum = 83, frac = 0.683
[Wed Jun 19 11:36:10 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 21.81"
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src16.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src16.csv
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src16.csv
[Wed Jun 19 11:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Jun 19 11:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:59:14 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 20.845892 pixels away
[Wed Jun 19 11:59:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 11:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 11:59:14 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 11:59:14 2013] Source does appear to be extended
[Wed Jun 19 11:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 12:47:35 2013] XMMSAS src. selection expression = ellipse(15723.594000, 14618.782000, 1308.571598, 1308.571598, 0.000000, X, Y)
[Wed Jun 19 12:47:35 2013] Writing source region out to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 19 12:47:35 2013] Extracting stamp from image fullrun_mos2_xmm0109660901_pi300-10000_cl_sm2.00.img.gz, (106, 93) - (256, 244)
[Wed Jun 19 12:47:35 2013] XMMSAS bgd. selection expression = annulus(15723.594000, 14618.782000, 2180.952664, 4361.905327, X, Y)
[Wed Jun 19 12:47:35 2013] Writing fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17.gif
[Wed Jun 19 12:52:27 2013] Mean detx,y = (15392.63, -5574.23) 
[Wed Jun 19 12:52:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 12:53:08 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 12:53:08 2013] Setting source spectrum file to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 19 12:53:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 19 12:58:53 2013] Not generating rmf since there are only 54 counts
[Wed Jun 19 12:58:53 2013] rmf not generated due to insufficient counts
[Wed Jun 19 13:00:47 2013] Updating aperture counts using extracted products
[Wed Jun 19 13:00:47 2013] Total counts from fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 105.00
[Wed Jun 19 13:00:47 2013] Total counts from fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17_bgd.pi.gz = 791.00
[Wed Jun 19 13:00:47 2013] Got source and background scale factors 3060589.000000, 17039983.000000
[Wed Jun 19 13:00:47 2013] User source parameters:
  Position = (181.3, 168.6) = 13 35 20.12 37 43 36.3
  Extent = 21.8 (14.7-25.4)", rotation angle = 0
  Source aperture counts = -37.1 +/- 11.3
  Background aperture counts = 142.1
  Rate = -0.002 +/- 0.0006

[Wed Jun 19 13:00:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 13:00:47 2013] Using photon index=1.80, rate=0.00271, arf fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17.arf
[Wed Jun 19 13:00:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 13:00:47 2013] Updating source flux to 1e-13
[Wed Jun 19 13:00:49 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 13:00:50 2013] xmm0109660901/analysis//spectral/fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete