[Wed Jun 19 09:18:51 2013] Detection parameters:
  Position = (300.2, 339.3) = 13 34 36.50 37 55 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.1 +/- 22.5
  Background counts = 190.1
  Rate = 0.005 +/- 0.0006

[Wed Jun 19 09:18:52 2013] Off-axis axis estimate = 2.97'
[Wed Jun 19 10:18:16 2013] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:18:16 2013] Initial guess for spatial extent in simple fitting = 7.91"
[Wed Jun 19 10:18:16 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.930
[Wed Jun 19 10:18:16 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.91"
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 19 10:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src11.csv
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 19 10:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src11.csv
[Wed Jun 19 10:41:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 19 10:41:56 2013] Fit fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 19 10:42:06 2013] Spatial fit model total counts = 248.317000, observed total counts = 235.000000
[Wed Jun 19 10:42:06 2013] Offset between fit and detection position for source 12 = 0.427327 pixels
[Wed Jun 19 10:42:06 2013] 241.512800 total counts/ 181.036000 bgd. counts: snr = 4.494758
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.427327 pixels
  Position = (300.1, 339.0) = 13 34 36.57 37 55 57.9
  Extent = 5.8 (2.9-8.1)", rotation angle = 0
  Source counts = 60.5 +/- 15.5
  Background counts = 181.0
  Rate = 0.003 +/- 0.0008
[Wed Jun 19 10:42:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:42:06 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 10:42:06 2013] Source does appear to be extended
[Wed Jun 19 10:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:36:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:36:10 2013] Initial guess for spatial extent in simple fitting = 5.84"
[Wed Jun 19 11:36:10 2013] source mask rpix=1.3, npix_max = 13, mask sum = 11, frac = 0.809
[Wed Jun 19 11:36:10 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 5.84"
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src11.csv
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src11.csv
[Wed Jun 19 11:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Jun 19 11:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:59:14 2013] Warning, spatial fit 11 centroid is now closest to src. 8
[Wed Jun 19 11:59:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 11:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 11:59:14 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 11:59:14 2013] Source does appear to be extended
[Wed Jun 19 11:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 12:47:35 2013] XMMSAS src. selection expression = ellipse(26056.740940, 29440.570800, 350.690410, 350.690410, 0.000000, X, Y)
[Wed Jun 19 12:47:35 2013] Writing source region out to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12_src.reg
[Wed Jun 19 12:47:35 2013] Extracting stamp from image fullrun_mos2_xmm0109660901_pi300-10000_cl_sm2.00.img.gz, (280, 319) - (320, 359)
[Wed Jun 19 12:47:35 2013] XMMSAS bgd. selection expression = annulus(26056.740940, 29440.570800, 584.484017, 1168.968034, X, Y)
[Wed Jun 19 12:47:35 2013] Writing fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12.gif
[Wed Jun 19 12:51:04 2013] Mean detx,y = (-827.72, 1294.45) 
[Wed Jun 19 12:51:05 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 12:51:12 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 12:51:12 2013] Setting source spectrum file to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jun 19 12:51:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Jun 19 12:58:15 2013] Not generating rmf since there are only 60 counts
[Wed Jun 19 12:58:15 2013] rmf not generated due to insufficient counts
[Wed Jun 19 13:00:46 2013] Updating aperture counts using extracted products
[Wed Jun 19 13:00:46 2013] Total counts from fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 92.00
[Wed Jun 19 13:00:46 2013] Total counts from fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12_bgd.pi.gz = 235.00
[Wed Jun 19 13:00:46 2013] Got source and background scale factors 317948.000000, 3018636.000000
[Wed Jun 19 13:00:46 2013] User source parameters:
  Position = (300.1, 339.0) = 13 34 36.57 37 55 57.9
  Extent = 5.8 (2.9-8.1)", rotation angle = 0
  Source aperture counts = 67.2 +/- 10.6
  Background aperture counts = 24.8
  Rate = 0.003 +/- 0.0005

[Wed Jun 19 13:00:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 13:00:47 2013] Using photon index=1.80, rate=0.00298, arf fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12.arf
[Wed Jun 19 13:00:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 13:00:47 2013] Updating source flux to 3.5e-14
[Wed Jun 19 13:00:49 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 13:00:50 2013] xmm0109660901/analysis//spectral/fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete