[Wed Jun 19 09:18:51 2013] Detection parameters:
  Position = (259.5, 206.4) = 13 34 51.44 37 46 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2464.1 +/- 64.4
  Background counts = 131.1
  Rate = 0.05 +/- 0.001

[Wed Jun 19 09:18:52 2013] Off-axis axis estimate = 7.25'
[Wed Jun 19 10:18:16 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 10:18:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 10:18:16 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Wed Jun 19 10:18:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.633
[Wed Jun 19 10:18:16 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.05"
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 19 10:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src1.csv
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 19 10:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src1.csv
[Wed Jun 19 10:41:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 19 10:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 19 10:41:56 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 19 10:41:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 19 10:41:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 10:42:06 2013] Spatial fit model total counts = 1073.350000, observed total counts = 950.000000
[Wed Jun 19 10:42:06 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 10:42:06 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 10:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 10:42:06 2013] Assessing source extent using major
[Wed Jun 19 10:42:06 2013] Source does appear to be extended
[Wed Jun 19 10:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 11:36:10 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 11:36:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 19 11:36:10 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Wed Jun 19 11:36:10 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.633
[Wed Jun 19 11:36:10 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.05"
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src1.csv
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src1.csv
[Wed Jun 19 11:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 19 11:59:04 2013] fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 19 11:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 19 11:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 11:59:14 2013] Spatial fit model total counts = 1075.560000, observed total counts = 950.000000
[Wed Jun 19 11:59:14 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 11:59:14 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 11:59:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 11:59:14 2013] Assessing source extent using major
[Wed Jun 19 11:59:14 2013] Source does appear to be extended
[Wed Jun 19 11:59:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 12:47:35 2013] Counts = 2464.053467, rescaling region sizes by 2.000000
[Wed Jun 19 12:47:35 2013] XMMSAS src. selection expression = ellipse(22531.849792, 17905.381592, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 19 12:47:35 2013] Writing source region out to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 19 12:47:35 2013] Extracting stamp from image fullrun_mos2_xmm0109660901_pi300-10000_cl_sm2.00.img.gz, (185, 131) - (335, 281)
[Wed Jun 19 12:47:35 2013] XMMSAS bgd. selection expression = annulus(22531.849792, 17905.381592, 4350.000000, 8700.000000, X, Y) && !ellipse(27275.136627, 20414.072311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16689.205400, 25433.283400, 389.157611, 389.157611, 0.000000, X, Y) && !ellipse(19871.696800, 22144.908000, 353.701610, 353.701610, 0.000000, X, Y) && !ellipse(15723.594000, 14618.782000, 1744.762131, 1744.762131, 0.000000, X, Y)
[Wed Jun 19 12:47:35 2013] Writing fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1.gif
[Wed Jun 19 12:47:38 2013] Mean detx,y = (8373.38, -6572.05) 
[Wed Jun 19 12:47:40 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 12:48:39 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 12:48:39 2013] Setting source spectrum file to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 19 12:48:39 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 19 12:53:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 12:53:11 2013] rmf not generated due to insufficient counts
[Wed Jun 19 13:00:44 2013] Updating aperture counts using extracted products
[Wed Jun 19 13:00:44 2013] Total counts from fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1170.00
[Wed Jun 19 13:00:44 2013] Total counts from fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 7345.00
[Wed Jun 19 13:00:44 2013] Got source and background scale factors 4683590.000000, 137418527.000000
[Wed Jun 19 13:00:44 2013] User source parameters:
  Position = (259.5, 206.4) = 13 34 51.44 37 46 18.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 919.7 +/- 35.2
  Background aperture counts = 250.3
  Rate = 0.05 +/- 0.002

[Wed Jun 19 13:00:44 2013] Updating counts from extracted products
[Wed Jun 19 13:00:44 2013] Set source signif. to 919.66/15.82 = 58.13
[Wed Jun 19 13:00:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 13:00:47 2013] Using photon index=1.80, rate=0.0454, arf fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1.arf
[Wed Jun 19 13:00:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 13:00:47 2013] Updating source flux to 8.4e-13
[Wed Jun 19 13:00:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 13:00:50 2013] xmm0109660901/analysis//spectral/fullrun_mos2_xmm0109660901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete