[Thu Aug 16 10:59:05 2012] Detection parameters:
  Position = (392.8, 277.2) = 13 34 2.51 37 51 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.8 +/- 15.5
  Background counts = 52.3
  Rate = 0.002 +/- 0.0003

[Thu Aug 16 10:59:05 2012] Off-axis axis estimate = 7.01'
[Thu Aug 16 12:43:14 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 12:43:14 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Aug 16 12:43:14 2012] source mask rpix=2.3, npix_max = 30, mask sum = 33, frac = 1.065
[Thu Aug 16 12:43:14 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.93"
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src20.ximg exists
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Aug 16 13:25:12 2012] Fit fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src20 appears to have run properly
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Aug 16 13:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 13:25:30 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 12.941823 pixels away
[Thu Aug 16 13:25:30 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 13.224839 pixels away
[Thu Aug 16 13:25:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 13:25:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 13:25:30 2012] Assessing source extent using major
[Thu Aug 16 13:25:30 2012] Source does appear to be extended
[Thu Aug 16 13:25:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 14:51:42 2012] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 14:51:42 2012] Initial guess for spatial extent in simple fitting = 9.93"
[Thu Aug 16 14:51:42 2012] source mask rpix=2.3, npix_max = 30, mask sum = 33, frac = 1.065
[Thu Aug 16 14:51:42 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.93"
[Thu Aug 16 15:27:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src19.ximg exists
[Thu Aug 16 15:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src19.csv
[Thu Aug 16 15:27:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Aug 16 15:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src19.csv
[Thu Aug 16 15:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:27:13 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Aug 16 15:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Aug 16 15:27:13 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Aug 16 15:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src19.csv
[Thu Aug 16 15:27:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:27:30 2012] Source 32 is offset by 5.782464 and -5.398070 pixels which is larger than
2 X fitted extent = 1.540322 x 1.540322, not incorporating fit results
[Thu Aug 16 15:27:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 15:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 15:27:30 2012] Assessing source extent using major
[Thu Aug 16 15:27:30 2012] Source does appear to be extended
[Thu Aug 16 15:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 17:10:30 2012] XMMSAS src. selection expression = ellipse(34125.542328, 24070.595917, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 17:10:30 2012] Writing source region out to fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src32_src.reg
[Thu Aug 16 17:10:30 2012] Extracting stamp from image fullrun_mos2_xmm0109660801_pi300-10000_cl_sm2.00.img.gz, (355, 240) - (430, 315)
[Thu Aug 16 17:10:30 2012] XMMSAS bgd. selection expression = annulus(34125.542328, 24070.595917, 1087.500000, 2175.000000, X, Y) && !ellipse(34747.482941, 21294.372498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35707.860138, 25745.016693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32706.133200, 25063.598200, 328.056663, 328.056663, 0.000000, X, Y) && !ellipse(33939.970000, 26321.104000, 307.232009, 307.232009, 0.000000, X, Y)
[Thu Aug 16 17:10:30 2012] Writing fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src32.gif
[Thu Aug 16 17:17:30 2012] Mean detx,y = (-4746.39, -7581.07) 
[Thu Aug 16 17:17:32 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 17:17:48 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 17:17:48 2012] Setting source spectrum file to fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Aug 16 17:17:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Aug 16 17:41:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 17:41:50 2012] rmf not generated due to insufficient counts
[Thu Aug 16 17:45:08 2012] Updating aperture counts using extracted products
[Thu Aug 16 17:45:08 2012] Error reading totcts from fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Aug 16 17:45:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 17:45:09 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src32.arf
[Thu Aug 16 17:45:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 17:45:09 2012] Updating source flux to 3.4e-14
[Thu Aug 16 17:45:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting