[Thu Aug 16 10:59:04 2012] Detection parameters:
  Position = (397.3, 311.9) = 13 34 0.85 37 54 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.8 +/- 18.1
  Background counts = 53.9
  Rate = 0.003 +/- 0.0005

[Thu Aug 16 10:59:05 2012] Off-axis axis estimate = 7.23'
[Thu Aug 16 12:43:14 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 12:43:14 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Thu Aug 16 12:43:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.602
[Thu Aug 16 12:43:14 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.04"
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src18.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src18.csv
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src18.csv
[Thu Aug 16 13:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Aug 16 13:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 13:25:30 2012] Spatial fit model total counts = 412.981000, observed total counts = 371.000000
[Thu Aug 16 13:25:30 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 16 13:25:30 2012] Spatial fit model total counts = 361.228000, observed total counts = 349.000000
[Thu Aug 16 13:25:30 2012] Offset between fit and detection position for source 28 = 2.357505 pixels
[Thu Aug 16 13:25:30 2012] Warning, changing simple spatial fit ID from 18 to 31
[Thu Aug 16 13:25:30 2012] 362.845300 total counts/ 337.130000 bgd. counts: snr = 1.400532
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.357505 pixels
  Position = (395.6, 310.2) = 13 34 1.45 37 53 52.8
  Extent = 4.5 (2.7-10.4)", rotation angle = 0
  Source counts = 25.7 +/- 19.0
  Background counts = 337.1
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability