[Thu Aug 16 10:59:04 2012] Detection parameters:
  Position = (314.3, 235.2) = 13 34 31.33 37 48 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.7 +/- 22.8
  Background counts = 56.7
  Rate = 0.009 +/- 0.0006

[Thu Aug 16 10:59:05 2012] Off-axis axis estimate = 4.73'
[Thu Aug 16 12:43:14 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 12:43:14 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Thu Aug 16 12:43:14 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.708
[Thu Aug 16 12:43:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.79"
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug 16 13:25:12 2012] Fit fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Aug 16 13:25:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug 16 13:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Aug 16 13:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 13:25:30 2012] Warning, spatial fit 3 centroid is now closest to src. 34
[Thu Aug 16 13:25:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 13:25:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 13:25:30 2012] Assessing source extent using major
[Thu Aug 16 13:25:30 2012] Source does appear to be extended
[Thu Aug 16 13:25:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 14:51:42 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 14:51:42 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Thu Aug 16 14:51:42 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.708
[Thu Aug 16 14:51:42 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.79"
[Thu Aug 16 15:27:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug 16 15:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src3.csv
[Thu Aug 16 15:27:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug 16 15:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src3.csv
[Thu Aug 16 15:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:27:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug 16 15:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug 16 15:27:12 2012] fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug 16 15:27:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug 16 15:27:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:27:30 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 14.086299 pixels away
[Thu Aug 16 15:27:30 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 15:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 15:27:30 2012] Assessing source extent using major
[Thu Aug 16 15:27:30 2012] Source does appear to be extended
[Thu Aug 16 15:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 17:10:29 2012] XMMSAS src. selection expression = ellipse(27299.849640, 20413.088623, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 17:10:29 2012] Writing source region out to fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19_src.reg
[Thu Aug 16 17:10:29 2012] Extracting stamp from image fullrun_mos2_xmm0109660801_pi300-10000_cl_sm2.00.img.gz, (277, 198) - (352, 273)
[Thu Aug 16 17:10:29 2012] XMMSAS bgd. selection expression = annulus(27299.849640, 20413.088623, 1087.500000, 2175.000000, X, Y) && !ellipse(28907.676400, 17767.940000, 570.773616, 211.361606, 26.165422, X, Y)
[Thu Aug 16 17:10:29 2012] Writing fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19.gif
[Thu Aug 16 17:13:06 2012] Mean detx,y = (2954.86, -7038.42) 
[Thu Aug 16 17:13:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 17:13:23 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 17:13:23 2012] Setting source spectrum file to fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug 16 17:13:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Aug 16 17:22:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 17:22:15 2012] rmf not generated due to insufficient counts
[Thu Aug 16 17:45:08 2012] Updating aperture counts using extracted products
[Thu Aug 16 17:45:08 2012] Error reading totcts from fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug 16 17:45:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 17:45:09 2012] Using photon index=1.80, rate=0.00933, arf fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19.arf
[Thu Aug 16 17:45:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 17:45:09 2012] Updating source flux to 1.8e-13
[Thu Aug 16 17:45:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug 16 17:46:10 2012] xmm0109660801/analysis//spectral/fullrun_mos2_xmm0109660801_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete