[Thu Aug 16 10:58:13 2012] Detection parameters:
  Position = (403.2, 390.7) = 13 33 58.61 37 59 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.2 +/- 20.5
  Background counts = 91.5
  Rate = 0.006 +/- 0.0006

[Thu Aug 16 10:58:14 2012] Off-axis axis estimate = 10.12'
[Thu Aug 16 12:12:02 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 12:12:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 12:12:02 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Thu Aug 16 12:12:02 2012] source mask rpix=2.6, npix_max = 39, mask sum = 28, frac = 0.709
[Thu Aug 16 12:12:02 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.49"
[Thu Aug 16 12:43:14 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug 16 12:43:14 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug 16 12:43:14 2012] Fit fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_src6 appears to have run properly
[Thu Aug 16 12:43:14 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug 16 12:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 16 12:43:14 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug 16 12:43:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug 16 12:43:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109660801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 13:25:25 2012] Spatial fit model total counts = 298.606000, observed total counts = 280.000000
[Thu Aug 16 13:25:25 2012] Offset between fit and detection position for source 4 = 0.883055 pixels
[Thu Aug 16 13:25:25 2012] 299.068000 total counts/ 181.793000 bgd. counts: snr = 8.697949
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.883055 pixels
  Position = (402.6, 390.1) = 13 33 58.85 37 59 40.1
  Extent = 7.9" x 4.5", rotation angle = 8
  Source counts = 117.3 +/- 17.3
  Background counts = 181.8
  Rate = 0.002 +/- 0.0003
[Thu Aug 16 13:25:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 13:25:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 13:25:25 2012] Assessing source extent using major
[Thu Aug 16 13:25:25 2012] Source does appear to be extended
[Thu Aug 16 13:25:25 2012] Computing asymmetry using major and minor axis, asym = 1.76
[Thu Aug 16 13:25:25 2012] Source is asymmetric
[Thu Aug 16 14:19:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 14:19:47 2012] Initial guess for spatial extent in simple fitting = 6.19"
[Thu Aug 16 14:19:47 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.608
[Thu Aug 16 14:19:47 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.19"
[Thu Aug 16 14:51:41 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_src6.ximg exists
[Thu Aug 16 14:51:41 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Aug 16 14:51:41 2012] Fit fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_src6 appears to have run properly
[Thu Aug 16 14:51:42 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Aug 16 14:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug 16 14:51:42 2012] fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Aug 16 14:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug 16 14:51:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109660801_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 15:27:25 2012] Spatial fit model total counts = 308.428000, observed total counts = 289.000000
[Thu Aug 16 15:27:25 2012] Offset between fit and detection position for source 4 = 0.336670 pixels
[Thu Aug 16 15:27:25 2012] 309.318000 total counts/ 191.750000 bgd. counts: snr = 8.490269
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.336670 pixels
  Position = (402.6, 389.8) = 13 33 58.83 37 59 38.6
  Extent = 8.0" x 4.4", rotation angle = 359
  Source counts = 117.6 +/- 17.6
  Background counts = 191.8
  Rate = 0.002 +/- 0.0003
[Thu Aug 16 15:27:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 15:27:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 15:27:25 2012] Assessing source extent using major
[Thu Aug 16 15:27:25 2012] Source does appear to be extended
[Thu Aug 16 15:27:25 2012] Computing asymmetry using major and minor axis, asym = 1.82
[Thu Aug 16 15:27:25 2012] Source is asymmetric
[Thu Aug 16 16:42:19 2012] XMMSAS src. selection expression = ellipse(34980.156088, 33859.941198, 481.326511, 264.396252, 359.041166, X, Y)
[Thu Aug 16 16:42:19 2012] Writing source region out to fullrun_mos1_xmm0109660801_pi300-10000_pass1_cl_src4_src.reg
[Thu Aug 16 16:42:19 2012] Extracting stamp from image fullrun_mos1_xmm0109660801_pi300-10000_cl_sm2.00.img.gz, (375, 362) - (430, 417)
[Thu Aug 16 16:42:19 2012] XMMSAS bgd. selection expression = annulus(34980.156088, 33859.941198, 802.210852, 1604.421705, X, Y)
[Thu Aug 16 16:42:19 2012] Writing fullrun_mos1_xmm0109660801_pi300-10000_pass1_cl_src4.gif
[Thu Aug 16 16:44:17 2012] Mean detx,y = (397.26, 10548.77) 
[Thu Aug 16 16:44:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 16:44:36 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 16:44:36 2012] Setting source spectrum file to fullrun_mos1_xmm0109660801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Aug 16 16:44:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109660801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Aug 16 17:45:07 2012] Updating aperture counts using extracted products
[Thu Aug 16 17:45:07 2012] Error reading totcts from fullrun_mos1_xmm0109660801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Aug 16 17:45:08 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 17:45:08 2012] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0109660801_pi300-10000_pass1_cl_src4.arf
[Thu Aug 16 17:45:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 17:45:08 2012] Updating source flux to 6.3e-14