[Sat Jun 22 05:37:45 2013] Detection parameters:
  Position = (345.7, 251.4) = 1 52 34.75 -14 2 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 332.2 +/- 23.5
  Background counts = 48.6
  Rate = 0.009 +/- 0.0006

[Sat Jun 22 05:37:48 2013] Off-axis axis estimate = 4.83'
[Sat Jun 22 05:38:54 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:38:54 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Jun 22 05:38:54 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.935
[Sat Jun 22 05:38:54 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 8.85"
[Sat Jun 22 05:38:57 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_src81.ximg exists
[Sat Jun 22 05:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_src81.csv
[Sat Jun 22 05:38:57 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_src81_1.ximg exists
[Sat Jun 22 05:38:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_src81.csv
[Sat Jun 22 05:38:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:38:59 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sat Jun 22 05:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sat Jun 22 05:38:59 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sat Jun 22 05:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sat Jun 22 05:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:39 2013] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 11.931886 pixels away
[Sat Jun 22 05:39:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:39:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:39:39 2013] Assessing source extent using major
[Sat Jun 22 05:39:39 2013] Source does appear to be extended
[Sat Jun 22 05:39:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:49 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:49 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Jun 22 05:40:49 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.935
[Sat Jun 22 05:40:49 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 8.85"
[Sat Jun 22 05:40:52 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_src80.ximg exists
[Sat Jun 22 05:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_src80.csv
[Sat Jun 22 05:40:52 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_src80_1.ximg exists
[Sat Jun 22 05:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_src80.csv
[Sat Jun 22 05:40:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:53 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sat Jun 22 05:40:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sat Jun 22 05:40:53 2013] fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sat Jun 22 05:40:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sat Jun 22 05:40:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:41:30 2013] Warning: source 80 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 10.582509 pixels away
[Sat Jun 22 05:41:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:41:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:41:31 2013] Assessing source extent using major
[Sat Jun 22 05:41:31 2013] Source does appear to be extended
[Sat Jun 22 05:41:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:42:43 2013] XMMSAS src. selection expression = ellipse(30025.988586, 21821.683884, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 05:42:43 2013] Not overwriting source region fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src.reg
[Sat Jun 22 05:42:43 2013] Extracting stamp from image fullrun_pn_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (308, 214) - (383, 289)
[Sat Jun 22 05:42:43 2013] XMMSAS bgd. selection expression = annulus(30025.988586, 21821.683884, 1087.500000, 2175.000000, X, Y) && !ellipse(28147.104004, 21832.965103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.351440, 20226.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29841.891510, 19971.147049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27119.416504, 19857.086990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28238.073273, 19594.440872, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:42:43 2013] Writing fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82.gif
[Sat Jun 22 05:43:01 2013] ../../xmm0109540101/products/events/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src.evt and ../../xmm0109540101/products/events/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_bgd.evt exist, delete to re-create
[Sat Jun 22 05:43:01 2013] Mean detx,y = (4499.61, 2973.98) 
[Sat Jun 22 05:43:01 2013] ../../xmm0109540101/products/images/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src.img and ../../xmm0109540101/products/images/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_bgd.img exist, delete to re-create
[Sat Jun 22 05:43:01 2013] ../../xmm0109540101/products/spectra/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src_b10.pi.gz and ../../xmm0109540101/products/spectra/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_bgd.pi exist, delete to re-create
[Sat Jun 22 05:43:01 2013] Setting source spectrum file to fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat Jun 22 05:43:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sat Jun 22 05:43:01 2013] ../../xmm0109540101/products/lightcurves/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src.lc and ../../xmm0109540101/products/lightcurves/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_bgd.lc exist, delete to re-create
[Sat Jun 22 05:43:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 05:43:34 2013] rmf not generated due to insufficient counts
[Sat Jun 22 05:43:34 2013] fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82.arf exists, delete to re-create
[Sat Jun 22 08:47:25 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:47:25 2013] Total counts from fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_src_b10.pi.gz = 514.00
[Sat Jun 22 08:47:26 2013] Total counts from fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_bgd.pi.gz = 1246.00
[Sat Jun 22 08:47:26 2013] Got source and background scale factors 1100188.000000, 6083540.000000
[Sat Jun 22 08:47:26 2013] User source parameters:
  Position = (345.7, 251.4) = 1 52 34.75 -14 2 5.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 288.7 +/- 23.7
  Background aperture counts = 225.3
  Rate = 0.006 +/- 0.0005

[Sat Jun 22 08:47:26 2013] Updating counts from extracted products
[Sat Jun 22 08:47:26 2013] Set source signif. to 288.67/15.01 = 19.23
[Sat Jun 22 08:47:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:47:38 2013] Using photon index=1.80, rate=0.00587, arf fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82.arf
[Sat Jun 22 08:47:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:47:38 2013] Updating source flux to 2.1e-14
[Sat Jun 22 08:49:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:26 2013] xmm0109540101/analysis//spectral/fullrun_pn_xmm0109540101_pi300-10000_pass1_cl_src82_pl.csv not found, spectral fit skipped or did not complete