[Sat Jun 22 05:37:59 2013] Detection parameters:
  Position = (256.0, 484.6) = 1 53 1.55 -13 45 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 10.9
  Background counts = 14.1
  Rate = 0.0009 +/- 0.0002

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 13.85'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Sat Jun 22 05:39:03 2013] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.099
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 13.35"
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src55.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src55.csv
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src55.csv
[Sat Jun 22 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:07 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Jun 22 05:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jun 22 05:39:07 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Jun 22 05:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sat Jun 22 05:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:15 2013] Warning, spatial fit 55 centroid is now closest to src. 25
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:15 2013] Source is confused with source 27
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Sat Jun 22 05:40:57 2013] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.099
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 13.35"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src53.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src53.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src53_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src53.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sat Jun 22 05:40:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:42:06 2013] Spatial fit model total counts = -584.443000, observed total counts = 326.000000
[Sat Jun 22 05:42:06 2013] Poor agreement between spatial fit and data for source 71
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 05:42:06 2013] Source 71 is offset by 7.322634 and 6.466721 pixels which is larger than
2 X fitted extent = 1.332878 x 10.663035, not incorporating fit results
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:38 2013] XMMSAS src. selection expression = ellipse(22220.879486, 42113.513916, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71_src.reg
[Sat Jun 22 07:31:38 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (218, 447) - (293, 522)
[Sat Jun 22 07:31:38 2013] XMMSAS bgd. selection expression = annulus(22220.879486, 42113.513916, 1087.500000, 2175.000000, X, Y) && !ellipse(21844.044800, 40089.596800, 647.585619, 269.972008, 343.020443, X, Y) && !ellipse(23003.340515, 42573.670319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22251.571625, 40542.341919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22290.130615, 42493.055664, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71.gif
[Sat Jun 22 07:57:57 2013] Mean detx,y = (12513.05, 10526.35) 
[Sat Jun 22 07:58:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:58:19 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:58:20 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Sat Jun 22 07:58:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Sat Jun 22 08:44:00 2013] Not generating rmf since there are only 50 counts
[Sat Jun 22 08:44:00 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:21 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:21 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 201.00
[Sat Jun 22 08:48:21 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71_bgd.pi.gz = 257.00
[Sat Jun 22 08:48:21 2013] Got source and background scale factors 1129224.000000, 2590014.000000
[Sat Jun 22 08:48:21 2013] User source parameters:
  Position = (256.0, 484.6) = 1 53 1.55 -13 45 9.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 89.0 +/- 15.2
  Background aperture counts = 112.0
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 08:48:21 2013] Updating counts from extracted products
[Sat Jun 22 08:48:21 2013] Set source signif. to 88.95/10.59 = 8.40
[Sat Jun 22 08:48:27 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:27 2013] Using photon index=1.80, rate=0.00166, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71.arf
[Sat Jun 22 08:48:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:27 2013] Updating source flux to 6.2e-14
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete