[Sat Jun 22 05:37:58 2013] Detection parameters:
  Position = (325.0, 225.4) = 1 52 40.92 -14 3 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.1 +/- 13.8
  Background counts = 13.2
  Rate = 0.003 +/- 0.0003

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 5.64'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 9.25"
[Sat Jun 22 05:39:03 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.25"
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src15.ximg exists
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Jun 22 05:39:05 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src15 appears to have run properly
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jun 22 05:39:06 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Jun 22 05:40:15 2013] Spatial fit model total counts = 284.196000, observed total counts = 264.000000
[Sat Jun 22 05:40:15 2013] Offset between fit and detection position for source 63 = 0.050724 pixels
[Sat Jun 22 05:40:15 2013] 283.235200 total counts/ 215.350000 bgd. counts: snr = 4.625968
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.050724 pixels
  Position = (325.1, 225.3) = 1 52 40.90 -14 3 59.2
  Extent = 4.6" x 3.7", rotation angle = 90
  Source counts = 67.9 +/- 16.8
  Background counts = 215.3
  Rate = 0.001 +/- 0.0003
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.25
[Sat Jun 22 05:40:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 4.17"
[Sat Jun 22 05:40:57 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.057
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 4.17"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src15.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src15.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jun 22 05:40:58 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jun 22 05:42:06 2013] Spatial fit model total counts = 283.496000, observed total counts = 264.000000
[Sat Jun 22 05:42:06 2013] Offset between fit and detection position for source 63 = 0.007373 pixels
[Sat Jun 22 05:42:06 2013] 283.017400 total counts/ 215.062000 bgd. counts: snr = 4.633852
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.007373 pixels
  Position = (325.1, 225.3) = 1 52 40.91 -14 3 59.3
  Extent = 4.1 (3.5-5.1)", rotation angle = 0
  Source counts = 68.0 +/- 16.8
  Background counts = 215.1
  Rate = 0.001 +/- 0.0003
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(28233.298780, 19556.071800, 244.040407, 244.040407, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (311, 211) - (339, 239)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(28233.298780, 19556.071800, 406.734012, 813.468023, X, Y) && !ellipse(27713.840393, 20126.267136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27099.840973, 19849.428558, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63.gif
[Sat Jun 22 07:38:30 2013] Mean detx,y = (-4020.14, -5935.33) 
[Sat Jun 22 07:38:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:38:49 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:38:50 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jun 22 07:38:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jun 22 08:33:28 2013] Not generating rmf since there are only 67 counts
[Sat Jun 22 08:33:28 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:12 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:12 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 88.00
[Sat Jun 22 08:48:12 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63_bgd.pi.gz = 50.00
[Sat Jun 22 08:48:12 2013] Got source and background scale factors 188800.000000, 742547.000000
[Sat Jun 22 08:48:12 2013] User source parameters:
  Position = (325.1, 225.3) = 1 52 40.91 -14 3 59.3
  Extent = 4.1 (3.5-5.1)", rotation angle = 0
  Source aperture counts = 75.3 +/- 10.4
  Background aperture counts = 12.7
  Rate = 0.001 +/- 0.0002

[Sat Jun 22 08:48:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:25 2013] Using photon index=1.80, rate=0.00127, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63.arf
[Sat Jun 22 08:48:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:25 2013] Updating source flux to 2.2e-14
[Sat Jun 22 08:48:54 2013] Source 63 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete