[Sat Jun 22 05:37:58 2013] Detection parameters:
  Position = (312.0, 228.7) = 1 52 44.80 -14 3 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.6 +/- 10.5
  Background counts = 13.6
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 5.15'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Sat Jun 22 05:39:03 2013] source mask rpix=2.1, npix_max = 26, mask sum = 26, frac = 0.984
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.00"
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src37.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src37.csv
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src37.csv
[Sat Jun 22 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Jun 22 05:39:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:15 2013] Warning, spatial fit 37 centroid is now closest to src. 60
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Sat Jun 22 05:40:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 26, frac = 0.984
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 9.00"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src37.ximg exists
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Jun 22 05:40:58 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src37 appears to have run properly
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sat Jun 22 05:40:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:42:06 2013] Warning, spatial fit 37 centroid is now closest to src. 60
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(27099.840973, 19849.428558, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (275, 191) - (350, 266)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(27099.840973, 19849.428558, 1087.500000, 2175.000000, X, Y) && !ellipse(28233.298780, 19556.071800, 325.387209, 325.387209, 0.000000, X, Y) && !ellipse(30017.840302, 21802.661926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28137.172440, 21812.970200, 316.138409, 316.138409, 0.000000, X, Y) && !ellipse(24630.036800, 19394.927000, 778.557622, 778.557622, 0.000000, X, Y) && !ellipse(27713.840393, 20126.267136, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62.gif
[Sat Jun 22 07:49:35 2013] Mean detx,y = (-2960.50, -6140.31) 
[Sat Jun 22 07:49:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:50:17 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:50:18 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sat Jun 22 07:50:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sat Jun 22 08:41:16 2013] Not generating rmf since there are only 63 counts
[Sat Jun 22 08:41:16 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:17 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:17 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 140.00
[Sat Jun 22 08:48:17 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62_bgd.pi.gz = 601.00
[Sat Jun 22 08:48:17 2013] Got source and background scale factors 1108362.000000, 9029109.000000
[Sat Jun 22 08:48:17 2013] User source parameters:
  Position = (312.0, 228.7) = 1 52 44.80 -14 3 45.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 66.2 +/- 12.9
  Background aperture counts = 73.8
  Rate = 0.001 +/- 0.0002

[Sat Jun 22 08:48:17 2013] Updating counts from extracted products
[Sat Jun 22 08:48:17 2013] Set source signif. to 66.22/8.59 = 7.71
[Sat Jun 22 08:48:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:26 2013] Using photon index=1.80, rate=0.00124, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62.arf
[Sat Jun 22 08:48:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:26 2013] Updating source flux to 1.7e-14
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete