[Sat Jun 22 05:37:55 2013] Detection parameters:
  Position = (224.4, 403.1) = 1 53 10.97 -13 51 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.0 +/- 19.1
  Background counts = 12.6
  Rate = 0.004 +/- 0.0004

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 9.29'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Sat Jun 22 05:39:03 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.07"
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 05:39:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 22 05:39:06 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Jun 22 05:40:15 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.379196 pixels away
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Sat Jun 22 05:40:57 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.07"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 22 05:40:58 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 22 05:42:06 2013] Spatial fit model total counts = 342.983000, observed total counts = 343.000000
[Sat Jun 22 05:42:06 2013] Offset between fit and detection position for source 6 = 0.188079 pixels
[Sat Jun 22 05:42:06 2013] 343.530000 total counts/ 183.633000 bgd. counts: snr = 11.799537
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.188079 pixels
  Position = (224.3, 403.1) = 1 53 11.03 -13 51 6.0
  Extent = 5.6 (4.9-6.5)", rotation angle = 0
  Source counts = 159.9 +/- 18.5
  Background counts = 183.6
  Rate = 0.003 +/- 0.0003
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(19461.690800, 35019.844200, 337.159210, 337.159210, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (205, 384) - (244, 422)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(19461.690800, 35019.844200, 561.932016, 1123.864032, X, Y) && !ellipse(19775.953740, 33485.613400, 500.135214, 500.135214, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6.gif
[Sat Jun 22 07:36:20 2013] Mean detx,y = (11360.16, 2967.91) 
[Sat Jun 22 07:36:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:36:34 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:36:34 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 22 07:36:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 22 08:48:11 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:11 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 193.00
[Sat Jun 22 08:48:11 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 196.00
[Sat Jun 22 08:48:11 2013] Got source and background scale factors 363200.000000, 2964800.000000
[Sat Jun 22 08:48:11 2013] User source parameters:
  Position = (224.3, 403.1) = 1 53 11.03 -13 51 6.0
  Extent = 5.6 (4.9-6.5)", rotation angle = 0
  Source aperture counts = 169.0 +/- 14.9
  Background aperture counts = 24.0
  Rate = 0.003 +/- 0.0003

[Sat Jun 22 08:48:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:24 2013] Using photon index=1.80, rate=0.00299, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6.arf
[Sat Jun 22 08:48:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:25 2013] Updating source flux to 8.8e-14
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete