[Sat Jun 22 05:37:58 2013] Detection parameters:
  Position = (181.1, 273.8) = 1 53 23.95 -14 0 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.2 +/- 9.1
  Background counts = 11.2
  Rate = 0.0007 +/- 0.0002

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 8.69'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Sat Jun 22 05:39:03 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.015
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 10.78"
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src67.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src67.csv
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src67.csv
[Sat Jun 22 05:39:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:07 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sat Jun 22 05:39:07 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sat Jun 22 05:39:07 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sat Jun 22 05:40:15 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.355708 pixels away
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 10.78"
[Sat Jun 22 05:40:57 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.015
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 10.78"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src62.ximg exists
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src62_1.ximg exists
[Sat Jun 22 05:40:58 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src62 appears to have run properly
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sat Jun 22 05:40:59 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sat Jun 22 05:42:06 2013] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.953609 pixels away
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:38 2013] XMMSAS src. selection expression = ellipse(15704.866760, 23769.905884, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52_src.reg
[Sat Jun 22 07:31:38 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (144, 236) - (219, 311)
[Sat Jun 22 07:31:38 2013] XMMSAS bgd. selection expression = annulus(15704.866760, 23769.905884, 1087.500000, 2175.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52.gif
[Sat Jun 22 08:01:50 2013] Mean detx,y = (8956.39, -8641.97) 
[Sat Jun 22 08:01:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 08:02:20 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 08:02:21 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Jun 22 08:02:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Jun 22 08:45:25 2013] Not generating rmf since there are only 38 counts
[Sat Jun 22 08:45:25 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:23 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:23 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 93.00
[Sat Jun 22 08:48:23 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52_bgd.pi.gz = 584.00
[Sat Jun 22 08:48:23 2013] Got source and background scale factors 1339200.000000, 10472758.000000
[Sat Jun 22 08:48:23 2013] User source parameters:
  Position = (181.1, 273.8) = 1 53 23.95 -14 0 28.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18.3 +/- 10.7
  Background aperture counts = 74.7
  Rate = 0.0003 +/- 0.0002

[Sat Jun 22 08:48:23 2013] Updating counts from extracted products
[Sat Jun 22 08:48:23 2013] Set source signif. to 18.32/8.64 = 2.12
[Sat Jun 22 08:48:27 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:27 2013] Using photon index=1.80, rate=0.000343, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52.arf
[Sat Jun 22 08:48:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:27 2013] Updating source flux to 7.5e-15
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete