[Sat Jun 22 05:37:58 2013] Detection parameters:
  Position = (322.8, 308.3) = 1 52 41.59 -13 57 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.5 +/- 13.7
  Background counts = 14.3
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 1.91'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Sat Jun 22 05:39:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.036
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.38"
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src31.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src31.csv
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src31.csv
[Sat Jun 22 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 22 05:39:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:15 2013] Warning, spatial fit 31 centroid is now closest to src. 20
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:15 2013] Source is confused with source 20
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Sat Jun 22 05:40:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.036
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 7.38"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src31.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src31.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src31.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat Jun 22 05:40:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:42:06 2013] Warning, spatial fit 31 centroid is now closest to src. 9
[Sat Jun 22 05:42:06 2013] Source 44 is offset by 1.255556 and 5.251124 pixels which is larger than
2 X fitted extent = 1.171605 x 1.171605, not incorporating fit results
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(28034.703339, 26775.077789, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (285, 271) - (360, 346)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(28034.703339, 26775.077789, 1087.500000, 2175.000000, X, Y) && !ellipse(28732.103600, 25961.064000, 716.584821, 716.584821, 0.000000, X, Y) && !ellipse(27406.560577, 25550.456146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30035.300040, 24926.623200, 401.486412, 401.486412, 0.000000, X, Y) && !ellipse(27255.184800, 27540.657160, 1170.280034, 1170.280034, 0.000000, X, Y) && !ellipse(28531.600037, 27189.843811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.033600, 25179.893707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.633240, 26769.913757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.419586, 25268.988525, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44.gif
[Sat Jun 22 07:45:56 2013] Mean detx,y = (-247.55, 243.58) 
[Sat Jun 22 07:45:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:46:17 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:46:17 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jun 22 07:46:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jun 22 08:40:12 2013] Not generating rmf since there are only 93 counts
[Sat Jun 22 08:40:12 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:16 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:16 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 520.00
[Sat Jun 22 08:48:16 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44_bgd.pi.gz = 521.00
[Sat Jun 22 08:48:16 2013] Got source and background scale factors 1164704.000000, 4274052.000000
[Sat Jun 22 08:48:16 2013] User source parameters:
  Position = (322.8, 308.3) = 1 52 41.59 -13 57 59.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 378.0 +/- 23.8
  Background aperture counts = 142.0
  Rate = 0.007 +/- 0.0004

[Sat Jun 22 08:48:16 2013] Updating counts from extracted products
[Sat Jun 22 08:48:16 2013] Set source signif. to 378.02/11.92 = 31.73
[Sat Jun 22 08:48:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:25 2013] Using photon index=1.80, rate=0.00707, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44.arf
[Sat Jun 22 08:48:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:26 2013] Updating source flux to 7.2e-14
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete