[Sat Jun 22 05:37:57 2013] Detection parameters:
  Position = (329.4, 343.4) = 1 52 39.61 -13 55 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.9 +/- 11.7
  Background counts = 13.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 3.96'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Sat Jun 22 05:39:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 8.41"
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src39.csv
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src39.csv
[Sat Jun 22 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun 22 05:39:06 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Jun 22 05:40:15 2013] Spatial fit model total counts = 247.944000, observed total counts = 246.000000
[Sat Jun 22 05:40:15 2013] Offset between fit and detection position for source 39 = 0.302417 pixels
[Sat Jun 22 05:40:15 2013] 241.470200 total counts/ 209.769000 bgd. counts: snr = 2.188795
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.302417 pixels
  Position = (329.3, 343.6) = 1 52 39.65 -13 55 24.6
  Extent = 3.4 (2.3-6.3)", rotation angle = 0
  Source counts = 31.7 +/- 15.5
  Background counts = 209.8
  Rate = 0.0006 +/- 0.0003
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 3.44"
[Sat Jun 22 05:40:57 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.351
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 3.44"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src39.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src39.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src39.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Jun 22 05:40:59 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Jun 22 05:42:06 2013] Spatial fit model total counts = 237.092000, observed total counts = 235.000000
[Sat Jun 22 05:42:06 2013] Offset between fit and detection position for source 39 = 0.012095 pixels
[Sat Jun 22 05:42:06 2013] 229.761000 total counts/ 197.811000 bgd. counts: snr = 2.271672
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.012095 pixels
  Position = (329.3, 343.7) = 1 52 39.65 -13 55 24.6
  Extent = 3.5 (2.4-6.9)", rotation angle = 0
  Source counts = 31.9 +/- 15.2
  Background counts = 197.8
  Rate = 0.0006 +/- 0.0003
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:38 2013] XMMSAS src. selection expression = ellipse(28600.525800, 29849.551600, 207.443406, 207.443406, 0.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39_src.reg
[Sat Jun 22 07:31:38 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (317, 332) - (341, 356)
[Sat Jun 22 07:31:38 2013] XMMSAS bgd. selection expression = annulus(28600.525800, 29849.551600, 345.739010, 691.478020, X, Y)
[Sat Jun 22 07:31:38 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39.gif
[Sat Jun 22 07:51:11 2013] Mean detx,y = (872.38, 3117.21) 
[Sat Jun 22 07:51:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:51:28 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:51:28 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Jun 22 07:51:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Jun 22 08:41:37 2013] Not generating rmf since there are only 31 counts
[Sat Jun 22 08:41:37 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:18 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:18 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 47.00
[Sat Jun 22 08:48:18 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39_bgd.pi.gz = 121.00
[Sat Jun 22 08:48:18 2013] Got source and background scale factors 137600.000000, 1134400.000000
[Sat Jun 22 08:48:18 2013] User source parameters:
  Position = (329.3, 343.7) = 1 52 39.65 -13 55 24.6
  Extent = 3.5 (2.4-6.9)", rotation angle = 0
  Source aperture counts = 32.3 +/- 7.9
  Background aperture counts = 14.7
  Rate = 0.0006 +/- 0.0001

[Sat Jun 22 08:48:26 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:26 2013] Using photon index=1.80, rate=0.000597, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39.arf
[Sat Jun 22 08:48:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:26 2013] Updating source flux to 1.1e-14
[Sat Jun 22 08:48:54 2013] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete