[Sat Jun 22 05:37:57 2013] Detection parameters:
  Position = (256.8, 489.0) = 1 53 1.31 -13 44 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.9 +/- 9.5
  Background counts = 13.9
  Rate = 0.0008 +/- 0.0002

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 14.14'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 13.50"
[Sat Jun 22 05:39:03 2013] source mask rpix=3.1, npix_max = 51, mask sum = 41, frac = 0.789
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 13.50"
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src63.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src63.csv
[Sat Jun 22 05:39:05 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Jun 22 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src63.csv
[Sat Jun 22 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:07 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Jun 22 05:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Jun 22 05:39:07 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Jun 22 05:39:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Sat Jun 22 05:39:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:15 2013] Warning, spatial fit 63 centroid is now closest to src. 24
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:15 2013] Source is confused with source 71
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 13.50"
[Sat Jun 22 05:40:57 2013] source mask rpix=3.1, npix_max = 51, mask sum = 41, frac = 0.789
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 13.50"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src59.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src59.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src59.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Jun 22 05:40:59 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Jun 22 05:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Jun 22 05:40:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:42:06 2013] Warning, spatial fit 59 centroid is now closest to src. 24
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:38 2013] XMMSAS src. selection expression = ellipse(22290.130615, 42493.055664, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun 22 07:31:38 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (219, 451) - (294, 526)
[Sat Jun 22 07:31:38 2013] XMMSAS bgd. selection expression = annulus(22290.130615, 42493.055664, 1087.500000, 2175.000000, X, Y) && !ellipse(21844.044800, 40089.596800, 647.585619, 269.972008, 343.020443, X, Y) && !ellipse(23003.340515, 42573.670319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22251.571625, 40542.341919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22220.879486, 42113.513916, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 07:31:38 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27.gif
[Sat Jun 22 08:00:33 2013] Mean detx,y = (12516.80, 10747.98) 
[Sat Jun 22 08:00:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 08:01:00 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 08:01:00 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jun 22 08:01:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun 22 08:44:58 2013] Not generating rmf since there are only 42 counts
[Sat Jun 22 08:44:58 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:22 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:22 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 168.00
[Sat Jun 22 08:48:22 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 250.00
[Sat Jun 22 08:48:23 2013] Got source and background scale factors 762576.000000, 2366980.000000
[Sat Jun 22 08:48:23 2013] User source parameters:
  Position = (256.8, 489.0) = 1 53 1.31 -13 44 50.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 87.5 +/- 14.0
  Background aperture counts = 80.5
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 08:48:23 2013] Updating counts from extracted products
[Sat Jun 22 08:48:23 2013] Set source signif. to 87.46/8.97 = 9.74
[Sat Jun 22 08:48:27 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:27 2013] Using photon index=1.80, rate=0.00164, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27.arf
[Sat Jun 22 08:48:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:27 2013] Updating source flux to 8.6e-14
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete