[Sat Jun 22 05:37:57 2013] Detection parameters:
  Position = (207.9, 234.7) = 1 53 15.93 -14 3 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 13.5
  Background counts = 10.9
  Rate = 0.004 +/- 0.0005

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 8.02'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 10.44"
[Sat Jun 22 05:39:03 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.070
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.44"
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 22 05:39:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 22 05:39:06 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jun 22 05:40:15 2013] Spatial fit model total counts = 192.000000, observed total counts = 192.000000
[Sat Jun 22 05:40:15 2013] Offset between fit and detection position for source 23 = 0.101298 pixels
[Sat Jun 22 05:40:15 2013] 191.994400 total counts/ 113.049000 bgd. counts: snr = 7.424949
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.101298 pixels
  Position = (207.9, 234.6) = 1 53 15.95 -14 3 18.7
  Extent = 5.4 (4.3-6.5)", rotation angle = 0
  Source counts = 78.9 +/- 13.9
  Background counts = 113.0
  Rate = 0.001 +/- 0.0003
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 5.38"
[Sat Jun 22 05:40:57 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.996
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 5.38"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 22 05:40:58 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Jun 22 05:42:06 2013] Spatial fit model total counts = 192.000000, observed total counts = 192.000000
[Sat Jun 22 05:42:06 2013] Offset between fit and detection position for source 23 = 0.011653 pixels
[Sat Jun 22 05:42:06 2013] 191.988500 total counts/ 113.716000 bgd. counts: snr = 7.340040
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.011653 pixels
  Position = (207.9, 234.6) = 1 53 15.94 -14 3 18.7
  Extent = 5.3 (4.3-6.5)", rotation angle = 0
  Source counts = 78.3 +/- 13.9
  Background counts = 113.7
  Rate = 0.001 +/- 0.0003
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(18036.894040, 20364.637400, 316.855209, 316.855209, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (190, 216) - (226, 253)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(18036.894040, 20364.637400, 528.092015, 1056.184030, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23.gif
[Sat Jun 22 07:36:40 2013] Mean detx,y = (5191.53, -10404.59) 
[Sat Jun 22 07:36:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:36:58 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:36:58 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jun 22 07:36:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jun 22 08:25:16 2013] Not generating rmf since there are only 78 counts
[Sat Jun 22 08:25:16 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:11 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:11 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 98.00
[Sat Jun 22 08:48:11 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 151.00
[Sat Jun 22 08:48:11 2013] Got source and background scale factors 313600.000000, 2634380.000000
[Sat Jun 22 08:48:11 2013] User source parameters:
  Position = (207.9, 234.6) = 1 53 15.94 -14 3 18.7
  Extent = 5.3 (4.3-6.5)", rotation angle = 0
  Source aperture counts = 80.0 +/- 10.9
  Background aperture counts = 18.0
  Rate = 0.001 +/- 0.0002

[Sat Jun 22 08:48:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:25 2013] Using photon index=1.80, rate=0.00146, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23.arf
[Sat Jun 22 08:48:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:25 2013] Updating source flux to 3.7e-14
[Sat Jun 22 08:48:54 2013] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete