[Sat Jun 22 05:37:56 2013] Detection parameters:
  Position = (220.0, 315.1) = 1 53 12.30 -13 57 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.9 +/- 15.6
  Background counts = 10.7
  Rate = 0.005 +/- 0.0006

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 5.81'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Sat Jun 22 05:39:03 2013] source mask rpix=2.1, npix_max = 28, mask sum = 29, frac = 1.036
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.33"
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src8.csv
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src8.csv
[Sat Jun 22 05:39:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jun 22 05:39:06 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Jun 22 05:40:15 2013] Warning, spatial fit 8 centroid is now closest to src. 42
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Sat Jun 22 05:40:57 2013] source mask rpix=2.1, npix_max = 28, mask sum = 29, frac = 1.036
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.33"
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src8.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src8.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun 22 05:40:58 2013] Fit fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Jun 22 05:42:06 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.762303 pixels away
[Sat Jun 22 05:42:06 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.037695 pixels away
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(19094.306366, 27366.002350, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (183, 278) - (258, 353)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(19094.306366, 27366.002350, 1087.500000, 2175.000000, X, Y) && !ellipse(20377.276260, 26656.844025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18303.384600, 27279.696000, 509.396815, 509.396815, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19.gif
[Sat Jun 22 07:35:21 2013] Mean detx,y = (7822.98, -3801.62) 
[Sat Jun 22 07:35:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:35:46 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:35:46 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun 22 07:35:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jun 22 08:20:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 08:20:24 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:10 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:10 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 207.00
[Sat Jun 22 08:48:10 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 577.00
[Sat Jun 22 08:48:10 2013] Got source and background scale factors 1245532.000000, 8610996.000000
[Sat Jun 22 08:48:10 2013] User source parameters:
  Position = (220.0, 315.1) = 1 53 12.30 -13 57 25.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 123.5 +/- 15.4
  Background aperture counts = 83.5
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 08:48:10 2013] Updating counts from extracted products
[Sat Jun 22 08:48:10 2013] Set source signif. to 123.54/9.14 = 13.52
[Sat Jun 22 08:48:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:24 2013] Using photon index=1.80, rate=0.00231, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19.arf
[Sat Jun 22 08:48:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:24 2013] Updating source flux to 4.5e-14
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete