[Sat Jun 22 05:37:56 2013] Detection parameters:
  Position = (315.6, 294.2) = 1 52 43.75 -13 59 1.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 335.5 +/- 22.0
  Background counts = 14.5
  Rate = 0.007 +/- 0.0005

[Sat Jun 22 05:37:59 2013] Off-axis axis estimate = 1.28'
[Sat Jun 22 05:39:03 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:39:03 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Sat Jun 22 05:39:03 2013] source mask rpix=1.6, npix_max = 18, mask sum = 17, frac = 0.941
[Sat Jun 22 05:39:03 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.07"
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 22 05:39:04 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 22 05:39:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 22 05:39:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 22 05:39:06 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 22 05:39:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 22 05:39:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:15 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.136163 pixels away
[Sat Jun 22 05:40:15 2013] Spatial fit model total counts = 672.732000, observed total counts = 592.000000
[Sat Jun 22 05:40:15 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 05:40:15 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:40:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:40:15 2013] Assessing source extent using major
[Sat Jun 22 05:40:15 2013] Source does appear to be extended
[Sat Jun 22 05:40:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:40:57 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 05:40:57 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Sat Jun 22 05:40:57 2013] source mask rpix=1.6, npix_max = 18, mask sum = 17, frac = 0.941
[Sat Jun 22 05:40:57 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.07"
[Sat Jun 22 05:40:57 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 22 05:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 05:40:57 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 22 05:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 05:40:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 05:40:58 2013] fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 22 05:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 05:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109540101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 05:42:06 2013] Warning, spatial fit 4 centroid is now closest to src. 49
[Sat Jun 22 05:42:06 2013] Spatial fit model total counts = 674.001000, observed total counts = 592.000000
[Sat Jun 22 05:42:06 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 05:42:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 05:42:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 05:42:06 2013] Assessing source extent using major
[Sat Jun 22 05:42:06 2013] Source does appear to be extended
[Sat Jun 22 05:42:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 07:31:37 2013] XMMSAS src. selection expression = ellipse(27406.560577, 25550.456146, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing source region out to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun 22 07:31:37 2013] Extracting stamp from image fullrun_mos2_xmm0109540101_pi300-10000_cl_sm2.00.img.gz, (278, 257) - (353, 332)
[Sat Jun 22 07:31:37 2013] XMMSAS bgd. selection expression = annulus(27406.560577, 25550.456146, 1087.500000, 2175.000000, X, Y) && !ellipse(28732.103600, 25961.064000, 716.584821, 716.584821, 0.000000, X, Y) && !ellipse(27255.184800, 27540.657160, 1170.280034, 1170.280034, 0.000000, X, Y) && !ellipse(28531.600037, 27189.843811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.033600, 25179.893707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.703339, 26775.077789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.633240, 26769.913757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.419586, 25268.988525, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 07:31:37 2013] Writing fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10.gif
[Sat Jun 22 07:32:54 2013] Mean detx,y = (-288.43, -1177.84) 
[Sat Jun 22 07:32:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 07:33:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 07:33:14 2013] Setting source spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun 22 07:33:14 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun 22 08:04:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 08:04:45 2013] rmf not generated due to insufficient counts
[Sat Jun 22 08:48:09 2013] Updating aperture counts using extracted products
[Sat Jun 22 08:48:09 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 415.00
[Sat Jun 22 08:48:09 2013] Total counts from fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 565.00
[Sat Jun 22 08:48:09 2013] Got source and background scale factors 1127732.000000, 5869832.000000
[Sat Jun 22 08:48:09 2013] User source parameters:
  Position = (315.6, 294.2) = 1 52 43.75 -13 59 1.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 306.5 +/- 21.4
  Background aperture counts = 108.5
  Rate = 0.006 +/- 0.0004

[Sat Jun 22 08:48:09 2013] Updating counts from extracted products
[Sat Jun 22 08:48:09 2013] Set source signif. to 306.45/10.42 = 29.41
[Sat Jun 22 08:48:24 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 08:48:24 2013] Using photon index=1.80, rate=0.00573, arf fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10.arf
[Sat Jun 22 08:48:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 08:48:24 2013] Updating source flux to 6.6e-14
[Sat Jun 22 08:48:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 08:49:03 2013] xmm0109540101/analysis//spectral/fullrun_mos2_xmm0109540101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete